verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-40

The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X800-40 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ63 mm
  • Stroke800 mm
  • Port sizeG3/8
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM18×1.5
  • CushionAdjustable, 29 mm
$199.10 $206.60Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSIJ63 stroke, adjustment, mounting and version on one page All JSIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-40

Its extruded hard-anodized aluminium barrel omits external rods, making the overall body shorter than a same-bore ISO 15552 unit. The G3/8 port feeds a double-acting double-rod piston that moves at 30-800 mm/s.

The -40 code means an external adjuster can shorten the extend stroke on-site by up to 40 mm, giving a usable 760-800 mm range while the retract end stays fixed. You can fine-tune the end position without swapping the cylinder. Note this SKU lacks a magnet and cannot take a CMSE/DMSE switch; for the -S variant add sensing.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-40 Technical Specifications

ModelAirtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-40
SeriesJSI JIS-standard profile cylinder
Bore sizeØ63 mm
Stroke800 mm
Acting typeDouble acting, double rod, adjustable stroke
Port sizeG3/8
Rod threadM18×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N1962 N
Max (@1.0 MPa)286 kgf

JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).

Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-40

JSIJJIS-standard profile cylinder (adjustable-stroke type).
63Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×800Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-40 Is Used

conveyor_belt

Transfer Line Positioning

Dial in the exact push-off distance on a 800 mm conveyor transfer by turning the external adjuster to shorten the extend stroke up to 40 mm on-site.

warehouse

Pallet Stopper Gate

Act as a long-reach pallet stop gate where the 760-800 mm extend window lets you tweak the stopping point without machining a new mount.

vertical_align_bottom

Vertical Lowering Arm

Lower a fixture 800 mm while relying on the 29 mm adjustable air cushions to decelerate the payload smoothly at the end of the stroke.

Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-40 the Right Cylinder?

The adjustable stroke helps when you need to share a spare across stroke variants or tune an end position on-site. JSIJ mounting options include FA, LB, TC, TCM1 and TCM2. Because the 800 mm stroke is long, always use external guides to prevent rod bending and side loads. This plain version has no magnet; order the -S version for CMSE/DMSE sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-40 FAQ

This 63 mm bore cylinder pushes 1559 N and pulls 1402 N at 0.5 MPa. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical max force is 318 kgf at 1.0 MPa. It uses a G3/8 port and has a 20 mm rod with an M18x1.5 thread.

The nominal 800 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke on-site by up to 40 mm, yielding a usable extend range of 760-800 mm. The retract end is fixed. This mechanism sets the end position and is not a load lock; use an external rod lock or pilot-operated check valve to hold a load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSIJ63X800-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.