
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X800-40S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
An external stop screw lets you shorten the extend stroke by up to 40 mm, giving a usable range of 760 to 800 mm while the retract end stays fixed. The extruded hard-anodized aluminium barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 unit. It carries a built-in magnet for CMSE/DMSE sensors and uses a G3/8 port.
The adjustable air cushion at each end decelerates the piston near stroke end but does not lock the load. Because the stroke runs to 800 mm, fitting external guides is strongly recommended to prevent rod bending under side loads.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-40S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 800 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Fine-tune the 760 to 800 mm extend reach on site to push parts onto parallel conveyor lanes without swapping the cylinder.
Adjust the stop position by up to 40 mm to accommodate varying pallet depths while using the magnet for end-of-travel confirmation.
When sizing this unit, stepping down to a 50 mm bore drops the 0.5 MPa push force to 982 N, while moving up to an 80 mm bore raises it to 2513 N. The 63 mm bore sits in a versatile mid-range, and the 40 mm adjustable window is ideal when you want one shared spare cylinder that can cover slight stroke variations across multiple machines. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. The -S suffix means the side grooves are ready to accept CMSE or DMSE reed and electronic switches. For an 800 mm stroke, always use external linear guides to absorb side loads and protect the rod from bending.
Quick checklist
At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. This 63 mm bore model uses a G3/8 air port and features a 20 mm piston rod with an M18x1.5 rod-end thread.
The nominal 800 mm stroke is the maximum length. An external adjuster lets you shorten the extend stroke by up to 40 mm on site, giving a usable extend range of 760 to 800 mm. The retract end remains fixed. This mechanism sets the end position and does not hold the load on air loss.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.