Airtac MAC Stainless Steel Mini Air Cylinder MAC25X700SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC25X700SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø25mm bore and 700mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ25 mm
- Stroke700 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X700SCA
Pivot duty is where the MAC25X700SCA earns its keep: a CA back cover with an integrated pivot eye pins straight into linkages, levers and swing arms, cutting bracket work on a 700 mm made-to-order stroke. Double acting with a variable air cushion at each end, it pushes 245 N at 0.5 MPa and pulls 206 N at the same pressure on a 25 mm bore.
Design around 147 N of usable push at 0.5 MPa and the drive keeps margin in hand for friction losses through the linkage. Around a washdown corner of a food plant the stainless barrel and 20 um chrome rod resist the corrosion that eats painted minis, and the standard-fit magnet means CMSG, DMSG or EMSG switches mount without ordering a special piston.
Airtac MAC Stainless Steel Mini Air Cylinder MAC25X700SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC25X700SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 700 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC25X700SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X700SCA Is Used
Scissor-lift linkage driver
Pins into the scissor arm directly through the CA eye; 147 N of working push at 0.5 MPa raises the light platform while the cushion softens the top of travel.
Swing-arm pallet guide on a warehouse conveyor
The pivot eye lets the arm sweep through its arc with no extra rod-end bracket, and the standard magnet signals arm-park to the PLC via a DMSG switch.
Sluice gate lift on a textile dye trough
The pull side delivers 206 N at 0.5 MPa to retract the gate against water head, and the chrome-plated rod shrugs off humid dye-house air year after year.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC25X700SCA the Right Cylinder?
For lighter linkages a 20 mm bore at 157 N push (0.5 MPa) may suffice; for a heavy lever with tight pivots step up to 32 mm and 402 N push at 0.5 MPa. At 700 mm travel, keep side loads through the pivot eye low and guide the linkage externally, since a long unsupported rod is vulnerable to bending. Ports are 1/8 inch on this bore. Because the rod coasts when the valve centres or air drops, add a pilot check valve if the arm must stay parked mid-motion; FA flange or LB foot brackets can also steady the barrel alongside the CA eye.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC25X700SCA FAQ
Bore 25 mm: push 245 N and pull 206 N at 0.5 MPa, rising to 343 N push and 289 N pull at 0.7 MPa; the theoretical top figure is 50 kgf at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi), survives 1.5 MPa (215 psi) proof, and cycles at 30-800 mm/s. The 700 mm stroke is a to-order length, since the standard cap for this bore is 500 mm.
The CA cover integrates a pivot eye, so linkage pins connect without a separate rod-end knuckle - valuable on a 700 mm stroke where small misalignments multiply over the travel. Combined with the riveted stainless body and the standard magnet for CMSG, DMSG or EMSG sensors, it keeps a long pivot installation simple to build and align.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC25X700SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.