Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCA
Short-travel clamping is where this 10 mm stroke CA-pivot version earns its keep: air drives the rod both ways, and adjustable cushions at each end let even a hard clamp landing come in soft. The stainless round barrel shrugs at splash and wipe-downs that swell painted housings, while the chrome-plated 12 mm rod resists scoring cycle after cycle. Output at 0.5 MPa is 402 N; divide by gravity and the bore could hoist about 41 kg, so with a 2:1 margin it lifts roughly 20 kg vertically.
The CA pivot cover lets the whole body swivel on a pin - pair it with an I or Y rod knuckle when the tool must follow link motion. The magnet is standard, so CMSG, DMSG or EMSG switches drop straight on for position feedback. Supply 0.15-1.0 MPa (22-145 psi), cycle at 30-800 mm/s, and back the cushion needles off before the first run.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCA Is Used
Clamp fixture on a CNC drill jig
A 10 mm squeeze locks a machined blank into position; 402 N at 0.5 MPa holds it firmly without marking the surface.
Part presence check at a robot pick point
The short stroke confirms a casting has reached the nest before the arm descends, signalled by a DMSG switch on the standard magnet.
Nudge pusher on a pharma tray line
A wipe-clean stainless body and 10 mm advance move blister trays into a cartoning infeed without disturbing the row.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCA the Right Cylinder?
For a 10 mm move, bore 25 gives 245 N at 0.5 MPa and bore 40 gives 628 N, so pick this 32 mm when a clamp or probe needs mid-range push in a tight envelope. Vent the air and the piston simply floats - no spring holds a clamp shut, so pilot a check valve where a gripped part must not move during an e-stop. If the frame has no pivot point, switch to the U or CM back cover, or add an FA flange, LB foot or SDB bracket.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCA FAQ
At 0.5 MPa it pushes 402 N and pulls 346 N; at 0.7 MPa those figures become 563 N and 484 N. Theoretical maximum is 82 kgf at 1.0 MPa. Run it anywhere from 0.15-1.0 MPa (22-145 psi) and 30-800 mm/s, with both variable air cushions adjusted to the load.
A pin eye that lets the cylinder swivel as the linkage moves - ideal with an I or Y rod knuckle on clamp arms. Combined with the standard built-in magnet for CMSG, DMSG and EMSG switches, you get a pivoting, position-monitored mini cylinder without special-order parts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X10SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.