Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SCM
With 402 N of push at 0.5 MPa (72.5 psi), the MAC32X60SCM gives a 32 mm bore enough muscle for fixture clamping and light press work, pulling back with 345.6 N on the return stroke. Double-acting in both directions, it carries a variable air cushion at each end so needle screws can soften the 60 mm travel whichever way the piston lands.
The CM round-end back cover is the signature feature here - its rounded boss takes a pivot pin cleanly on machines where the cylinder rocks with the linkage. Build quality comes from the riveted stainless barrel and the hard-chromed 12 mm rod, both comfortable in washdown or humid shops. Sized honestly, expect about 241 N of dependable working force at 0.5 MPa, which corresponds to lifting roughly 20 kg vertically once a 2:1 margin is applied.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SCM Is Used
Small press-fit anvil on an assembly cell
Rolls bearings into housings through 60 mm; the 402 N push at 0.5 MPa covers light interference fits while the cushion removes the bang at seat.
Lift-and-lower gate under a hopper
Raises a slide gate weighing around 20 kg with margin to spare; pair a pilot check valve because the bare cylinder will not hold on air loss.
Rocking linkage on a lab dosing head
The CM round-end boss pivots with the dosing linkage, and needle-set cushioning keeps each 60 mm dose stroke repeatable at 300 mm/s.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SCM the Right Cylinder?
Pick this bore when the 25 mm cylinder (245.3 N push at 0.5 MPa) feels marginal but the 40 mm unit (628.3 N) would overshoot budget and space. Remember the piston cannot hold position on lost air - a pilot check valve or rod lock handles loads that must stay raised. The CM round back cover pairs naturally with SDB pivot brackets for swinging motion, while FA flange or LB foot brackets suit fixed installs, and the standard magnet accepts a CMSG or EMSG switch with no special-order piston.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SCM FAQ
Push at 0.5 MPa is 402.2 N, pull 345.6 N. At 0.7 MPa expect 563.0 N push and 483.8 N pull, with a theoretical ceiling of 82.0 kgf at 1.0 MPa. Pressure range is 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s, and both ends are cushioned.
Its rounded boss accepts a pivot pin directly, so rocking linkages and swing clamps mount without a stack of adapters. If you would rather bolt it down, FA flange or LB foot brackets fit the same body, and the built-in magnet supports CMSG, DMSG and EMSG switches as standard equipment.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X60SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.