Airtac MAC Stainless Steel Mini Air Cylinder MAC32X610SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X610SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 610mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke610 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X610SCM
Six hundred and ten millimetres of stroke from a 32 mm mini barrel is the whole point of the MAC32X610SCM, a double-acting cylinder with adjustable air cushioning at each end. Output sits at 402 N push and 346 N pull on 0.5 MPa air, climbing to 563 N at 0.7 MPa - so hold steady working demand near 241 N and the seals will run cool for years.
A 610 mm stroke lies 110 mm past the 500 mm standard ceiling, so the tube is produced to order with the same riveted stainless-steel body and 20 um hard-chrome rod as catalogue lengths. The CM round-end cover fixes straight to machine plates, and the standard-built magnet trips CMSG, DMSG or EMSG switches anywhere along the travel. Air supply 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-800 mm/s.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X610SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X610SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 610 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X610SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×610 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X610SCM Is Used
Battery-change ejector
Pushing a traction battery sideways off a maintenance trolley: the 610 mm stroke clears the full tray width and 402 N slides a 35 kg pack along rollers.
Roll coater doctor blade
A web-coating machine retracts its doctor blade 610 mm clear of the roll for threading; cushion needles stop the blade edge without chipping the wet coating.
Die-cart locators
Two of these cylinders lock a stamping die cart into the press bolster; the stainless tube shrugs off the oily press mist that corrodes painted minis.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X610SCM the Right Cylinder?
Position this model between the 25 mm bore (245.3 N push at 0.5 MPa) and the 40 mm bore (628.3 N) when the task needs mid-range force over an unusually long reach. Back the cushion screws off before first pressurisation, then close them gradually until end-of-stroke knock disappears. Since an unpowered MAC lets the load wander, team it with a pilot check valve when position must survive a valve swap or a supply drop.
Mount via FA flange, LB foot or SDB bracket to suit the frame; the CM round cover here suits through-hole fixing. Over a 610 mm stroke, guide external sliders carefully - side thrust bends a 12 mm rod long before the seals complain. 1/8" ports and M10x1.25 rod thread; G or NPT threads are selected at ordering instead of the standard PT.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X610SCM FAQ
At 0.5 MPa: 402.2 N push, 345.6 N pull. At 0.7 MPa: 563.0 N push, 483.8 N pull. Theoretical maximum output reaches 82 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), travel speed 30-800 mm/s.
Yes, up to 800 mm/s: both ends carry a variable air cushion, so open the needle screws fully at commissioning and close them step by step until the 610 mm travel decelerates smoothly, sparing the aluminium covers from repeated shock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X610SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.