Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCM
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCM is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 700mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke700 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCM
When the job stretches past three quarters of a metre, MAC32X700SCM answers with 402.2 N of push and 345.6 N of pull at 0.5 MPa - 563.0 N if you feed it 0.7 MPa. Budget about 240 N for real acceleration and friction work rather than the full rating, and the bore will happily slide or push heavy fixtures all shift. The riveted stainless barrel and 20 um hard-chrome rod shrug off corrosion, a genuine edge in damp or outdoor runs, while a variable air cushion at both ends lets faster cycling without hammering the covers.
This 700 mm stroke is produced to order, beyond the 500 mm standard limit for a 32 mm bore. The CM round-end back cover keeps the rear profile slim for clevis-style or pivoting fixtures, and the standard built-in magnet accepts CMSG / EMSG switches for mid-stroke and end-position feedback along the full travel.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCM Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCM |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCM
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCM Is Used
Oven door slide
Draws a long baking-oven cover open and closed, the stainless body shrugging off heat-adjacent humidity.
Mould part ejector
Pushes deep-drawn housings out of a forming tool, with 402 N at 0.5 MPa clearing the cavity cleanly.
Stacker pusher
Advances totes onto a racking lane, dialled cushion preventing the load crashing the far stop.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCM the Right Cylinder?
Drop to a 25 mm bore (245.3 N push at 0.5 MPa) if loads are light; move to 40 mm (628.3 N) if they are not. Because the cushion only softens deceleration, an unpowered or valved-centred piston will coast - fit a rod lock or pilot check valve wherever a load must stay parked. SDB pivot or LB foot mounting suits the long body, and at 700 mm the 12 mm rod should be kept in pure compression or guided externally to avoid bending under side load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCM FAQ
At 0.5 MPa: 402.2 N push, 345.6 N pull. At 0.7 MPa: 563.0 N push, 483.8 N pull. Theoretical peak at 1.0 MPa is 82 kgf. The cylinder runs on 0.15-1.0 MPa (22-145 psi) filtered air at speeds of 30-800 mm/s.
Turn both cushion needle screws fully open before first stroke, then close them gradually while cycling. The MAC's variable cushion at each end absorbs kinetic energy rather than locking the piston, so find the softest setting that stops end-of-stroke knock at your working speed - typically anywhere in the 30-800 mm/s range.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X700SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.