Airtac MAC Stainless Steel Mini Air Cylinder MAC32X800SCA
The AirTAC Airtac MAC Stainless Steel Mini Air Cylinder MAC32X800SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 800mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke800 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X800SCA
Eight hundred millimetres of travel is where MAC32X800SCA earns its place: 402.2 N of push and 345.6 N of pull at 0.5 MPa, or 563.0 N at 0.7 MPa. Translated for lifting duty, the bore theoretically carries 41 kgf, so a part of about 20 kg can be raised with a 2:1 safety margin. The rolling-packed stainless barrel with hard-chrome rod outlasts painted-steel minis around washdown and outdoor air, and a variable cushion at both stroke ends can be tuned with the needle screws to erase impact at speed.
The 800 mm length is made to order, well past the 500 mm standard ceiling for this bore. CA pivot eyes at the back cover connect directly to linkages and swing arms, and the standard piston magnet pairs with CMSG / DMSG / EMSG switches so position feedback follows the rod across its entire run.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X800SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X800SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X800SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X800SCA Is Used
Tote lift station
Raises loaded totes of around 20 kg between conveyor levels, the cushion easing the top-of-stroke arrival.
Shuttle drive
Propels a parts shuttle along an 800 mm linear track, needle-set cushioning softening both direction changes.
Roll-up door actuator
Unrolls a plant floor or machine enclosure door, the stainless barrel handling dusty, damp exterior air.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X800SCA the Right Cylinder?
A 25 mm bore manages only 245.3 N at 0.5 MPa and a 40 mm bore reaches 628.3 N, so this 32 mm unit sits squarely in the middle for mid-weight long-travel work. The variable cushion decelerates but never holds: if a mid-stroke power loss would let the load fall or slide, add a rod lock or pilot check valve. Use the CA pivot for linkage drives or choose FA flange and LB foot brackets for rigid mounts - and at 800 mm, external guides are strongly advised to keep bending loads off the 12 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X800SCA FAQ
Push 402.2 N and pull 345.6 N at 0.5 MPa; push 563.0 N and pull 483.8 N at 0.7 MPa; theoretical maximum 82 kgf at 1.0 MPa. Supply pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed range 30-800 mm/s.
For linkage and lever drives, yes - the CA eyes let the cylinder articulate with the mechanism without extra brackets. For rigidly guided strokes, add an FA flange or LB foot and, on this long 800 mm body, external rod guides to protect the 12 mm chrome-plated rod from side bending. Air ports are 1/8" and the rod thread is M10x1.25.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X800SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.