Airtac MAC Stainless Steel Mini Air Cylinder MAC32X90SCA
The AirTAC MAC Stainless Steel Mini Air Cylinder MAC32X90SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 90mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X90SCA
A pivot-mounted 32 mm mini cylinder for swing arms and lever linkages: the CA back cover carries the pin directly, removing a bracket from the motion chain. Inside sits a riveted stainless barrel with a hard-chrome rod, double acting with a variable air cushion you can tune at each end.
The magnet comes standard, so CMSG, DMSG or EMSG reed switches bolt straight on for end-of-stroke signalling.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X90SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X90SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X90SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X90SCA Is Used
Swing arm diverters
Swinging small cartons between conveyor lanes, the pivot pin carrying the arm directly without adapter plates.
Lever-operated valves
Toggling lever-handle ball valves through 90 degrees on compact process skids.
Robot wrist assists
Assisting a pick arm's wrist rotation on light electronic assemblies, with DMSG switches marking travel limits.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X90SCA the Right Cylinder?
Choose this over the 25 mm bore (245.3 N at 0.5 MPa) when a linkage needs more force, or step up to 40 mm (628.3 N) for heavier clamping. Keep in mind the piston will not park once air is removed - it simply follows the load - so add a rod lock or pilot check valve where a swing arm must stay put. The CA pivot pairs naturally with a rear clevis or lever; FA flange, LB foot and SDB pivot mounts cover fixed installations. Stroke is 90 mm on a 12 mm rod; keep side loads off the rod at full extension.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X90SCA FAQ
Across its 90 mm stroke the 32 mm bore develops 402.2 N push and 345.6 N pull at 0.5 MPa. At 0.7 MPa that becomes 563.0 N push and 483.8 N pull, with a theoretical peak of 82.0 kgf at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi) filtered air.
Every MAC body ships with a piston magnet already fitted, so CMSG, DMSG or EMSG switches mount on the barrel without ordering a special piston or paying extra. That makes end-position confirmation on the swing arm a plug-on job rather than a redesign.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X90SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.