Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SCA
The AirTAC MAC Stainless Steel Mini Air Cylinder MAC32X95SCA is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 95mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke95 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SCA
Double-acting and cushioned at both ends, the MAC32X95SCA packs a 32 mm bore into AirTAC's riveted round-body mini cylinder. At 0.5 MPa it pushes 402 N and pulls 346 N, rising to 563 N of push at 0.7 MPa, while the variable air cushion tunes out end-of-stroke shock on its 95 mm stroke.
The high-precision stainless barrel with hard-chrome plated rod takes washdown and damp plant air in its stride, an edge painted mini cylinders cannot match. A magnet is built in as standard, so CMSG, DMSG or EMSG switches clip on without special ordering.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SCA Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SCA |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SCA
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SCA Is Used
Carton diverter pusher
Sweeps cartons off a packaging conveyor into a sorting chute, using the 402 N push at 0.5 MPa and the full 95 mm throw.
Fixture clamp on a CNC jig
Clamps aluminium workpieces against a milling fixture, where roughly 241 N of usable force holds parts firm without crushing.
Small parts ejector
Knocks moulded housings out of a plastic injection die at the end of each shot, with the air cushion softening the return.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SCA the Right Cylinder?
Lighter jobs can drop to the 25 mm bore, which gives 245 N of push at 0.5 MPa; heavier ones step up to the 40 mm bore and 628 N. When air is vented the rod simply coasts, so fit a pilot check valve or rod lock if the load must stay in place. The CA pivot back cover accepts a clevis directly, FA flange or LB foot covers fixed mounting, and the 1/8 in ports plus M10x1.25 rod thread keep plumbing and tooling standard. On a 95 mm stroke, guide side loads externally to protect the 12 mm rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SCA FAQ
At 0.5 MPa it pushes 402 N and pulls 346 N; at 0.7 MPa, 563 N push and 484 N pull. The theoretical ceiling is about 82 kgf at 1.0 MPa. Supply air filtered to 40 um through the 1/8 in ports at 0.15-1.0 MPa (22-145 psi) and run anywhere from 30 to 800 mm/s.
The variable cushion ships wide open, so back the needle screws fully out before the first stroke and close them gradually until the rod lands quietly at both ends. Once tuned, speeds up to 800 mm/s and heavier loads become practical because the cushion absorbs the impact instead of the aluminium covers.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.