Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SU
The AirTAC MAC Stainless Steel Mini Air Cylinder MAC32X95SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø32mm bore and 95mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke95 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SU
With its U flat-end back cover, the MAC32X95SU bolts flat against a machine face with no extra bracket. The double-acting 32 mm bore generates 402 N of push and 346 N of pull at 0.5 MPa, climbing to 563 N at 0.7 MPa, and a variable air cushion at each end soaks up end-of-stroke shock.
Its rolling-packed stainless barrel and hard-chrome plated rod shrug off corrosion where painted minis rust, so splash zones and outdoor frames are fair game. Every unit carries the piston magnet as standard, letting CMSG or DMSG switches report rod position.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SU Technical Specifications
| Model | Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SU Is Used
Chute gate actuator
Opens and closes a gravity-fed sorting gate in a distribution hub, using the full 95 mm stroke cycle after cycle.
Bench-top press assist
Presses small bearings into housings at an assembly bench where about 402 N of controlled push does the job.
Guard door latch
Drives a sliding machine-guard door closed before cycle start, with a DMSG switch confirming the locked position.
Is the Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SU the Right Cylinder?
The 25 mm MAC gives 245 N at 0.5 MPa for lighter loads, while the 40 mm bore reaches 628 N when more muscle is needed. Because nothing springs the piston back, the rod drifts as soon as the valve centres - hold a load with a pilot check valve or rod lock instead. The flat end plus FA flange or LB foot handles fixed mounting, an SDB bracket adds a pivot point, and the M10x1.25 rod thread takes standard I or Y knuckles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SU FAQ
Rated output at 0.5 MPa is 402 N push and 346 N pull; at 0.7 MPa it reaches 563 N push and 484 N pull, with a theoretical maximum near 82 kgf at 1.0 MPa. Feed it air filtered to 40 um through the 1/8 in ports at 0.15-1.0 MPa (22-145 psi), at speeds of 30-800 mm/s.
It does, straight from the box: the magnet is built into the piston as standard equipment. Clip a CMSG, DMSG or EMSG switch alongside the stainless barrel and it detects rod position without modification, which suits end-of-stroke confirmation on automated stations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAC Stainless Steel Mini Air Cylinder MAC32X95SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.