This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement MBL20X210SCA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X210SCA
The AirTAC MAL20 Aluminum Alloy Mini Cylinder MAL20X210SCA is a double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 210mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the MBL20X210SCA, which matches its bore, stroke, force and mounting.
- BoreØ20 mm
- Stroke210 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → MBL20X210SCA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X210SCA
The AirTAC MAL20X210SCA is a discontinued compact double-acting aluminum mini round cylinder. It features a 20mm bore and 210mm stroke, delivering 157N push and 132N pull at 0.5 MPa. The direct replacement is the MBL20X210SCA, matching the bore, stroke, force, G1/8 port, and CA pivot mounting.
This SKU includes a CA pivot clevis back cover designed to swing on a pin for arcing loads. The original MAL body uses threaded front and back covers, whereas the MBL replacement features a riveted rolling-packed body. The -S magnet on this unit works with older CS1-M or DS1-M switches; upgrading to the MBL requires switching to CMSG, DMSG, or EMSG sensors.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X210SCA Technical Specifications
| Model | Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X210SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL20X210SCA |
| Bore size | Ø20 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL20X210SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
The MBL20X210SCA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X210SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×210 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X210SCA Is Used
Package Diverter Arm
Swings a lightweight routing gate on a packaging line using 157N of push force at 0.5 MPa, with the CA pivot absorbing the arcing motion.
PCB Edge Guide
Positions small electronic boards during assembly, relying on the 210mm stroke and the -S magnet for CS1-M sensor tracking.
Carton Flap Folder
Folds lightweight cardboard flaps on a compact filling machine where the 8mm rod and G1/8 port fit tight mechanical clearances.
Replacing the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X210SCA with MBL20X210SCA
To replace the MAL20X210SCA, order the MBL20X210SCA, ensuring the CA pivot back cover and -S magnet are carried over. If you need to step down for tighter spaces, the nearest smaller bore is 12mm (confirm from datasheet), but stepping up to the 25mm bore yields 245N push at 0.5 MPa. Note that the fixed rubber bumper softens end-of-stroke impacts but is not an adjustable cushion; for adjustable air cushioning, specify the MBLC series.
At 210mm stroke, the 8mm rod has low side-load tolerance, making the CA pivot mounting essential for absorbing radial stress. A plain MAL or MBL cylinder does not hold its position or load when air is lost, as the rod drifts; use an external rod lock or pilot-operated check valve for secure load holding.
Upgrade checklist
- ✓ Order the MBL20X210SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL20X210SCA instead of this discontinued model.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X210SCA FAQ
Yes, the MAL20X210SCA is discontinued. The direct replacement is the MBL20X210SCA, which matches the 20mm bore, 210mm stroke, force, G1/8 port, and CA pivot mounting.
At 0.5 MPa, it pushes 157N and pulls 132N; at 0.7 MPa it pushes 220N, with a maximum theoretical force of 32 kgf at 1.0 MPa. The -S magnet works with older CS1-M or DS1-M switches, while the MBL replacement uses CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBL20X210SCA replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X210SCA → MBL20X210SCA)
Tell us the quantity and destination — we quote the direct MBL20X210SCA replacement with price, stock and lead time, usually within 7-8 hours.