This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement MBL20X5CA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X5CA
The AirTAC MAL20 Aluminum Alloy Mini Cylinder MAL20X5CA is a double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 5mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the MBL20X5CA, which matches its bore, stroke, force and mounting.
- BoreØ20 mm
- Stroke5 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → MBL20X5CA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X5CA
The AirTAC MAL20X5CA is a discontinued, double-acting compact aluminum mini round cylinder. Delivering 157 N of push force at 0.5 MPa, it was built for short-stroke actuation in tight spaces. It features a 20 mm bore, a 5 mm stroke, an 8 mm carbon-steel rod with 20 um hard chrome plating, and a PT-threaded G1/8 port.
Because the MAL series is end-of-life, you must order the direct replacement MBL20X5CA. It matches the exact bore, stroke, output force, port size, and CA mounting. The original MAL used threaded front and back covers, whereas the current MBL uses a riveted rolling-packed body. Furthermore, this specific SKU lacks a built-in magnet, meaning it cannot accept any position sensor without upgrading to an MBL-S model that supports CMSG or DMSG switches.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X5CA Technical Specifications
| Model | Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X5CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL20X5CA |
| Bore size | Ø20 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL20X5CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
The MBL20X5CA produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X5CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×5 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X5CA Is Used
Pick-and-Place Ejection
Uses the 157 N push force to eject small molded plastic parts from a die plate over a very short 5 mm travel distance.
PCB Clamp Release
Retracts an 8 mm rod to release a spring-loaded clamp holding circuit boards during a wave soldering process.
Sorting Diverter Pivot
Leverages the CA clevis back cover to pivot a small guide flap, redirecting small pharmaceutical vials on a conveyor.
Replacing the Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X5CA with MBL20X5CA
To replace the MAL20X5CA, order the MBL20X5CA. Confirm your 20 mm bore, 5 mm stroke, G1/8 port, and PT thread form. This SKU includes a CA pivot back cover (clevis), which swings on a pin to accommodate arcing loads—do not rigidly bolt it if the mechanism travels in an arc. If you need to adjust force, stepping down is not an option as 20 mm is the smallest available bore. Stepping up to the 32 mm bore yields 402 N of push force at 0.5 MPa. The fixed rubber bumper softens end-of-stroke impact but is not an adjustable cushion; order an MBLC if you need adjustable air cushioning. Finally, a plain bumper does not hold the load if air pressure drops—install an external rod lock for fail-safe positioning.
Upgrade checklist
- ✓ Order the MBL20X5CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL20X5CA instead of this discontinued model.
Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X5CA FAQ
Yes, the MAL20X5CA is discontinued. The direct replacement is the MBL20X5CA, which shares the same 20 mm bore, 5 mm stroke, 157 N force, G1/8 port, and CA pivot mounting.
At 0.5 MPa, it provides 157 N push and 132 N pull force. At 0.7 MPa, push is 220 N, with a maximum theoretical force of 32 kgf at 1.0 MPa. Because this specific SKU lacks a -S magnet, it cannot accept CS1-M or DS1-M position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBL20X5CA replaces this model 1:1.
Fast Dispatch
MBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL20 Aluminum Alloy Mini Cylinder MAL20X5CA → MBL20X5CA)
Tell us the quantity and destination — we quote the direct MBL20X5CA replacement with price, stock and lead time, usually within 7-8 hours.