This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X100-S-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X100-S-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X100-S-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X100-S-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA
The AirTAC MAL32X100-S-CA is a discontinued double-acting aluminum mini round cylinder. It features a 32mm bore, a 100mm stroke, and delivers 402N of push force and 346N of pull force at 0.5MPa. The exact drop-in replacement is the MBL32X100-S-CA, which matches the original bore, stroke, output force, G1/8 port, and CA pivot mounting for a seamless swap.
This legacy SKU includes a built-in magnet (-S) for position detection and a CA pivot back cover designed to accommodate arcing rod paths. The original MAL body utilizes threaded front and back covers, whereas the current MBL upgrade features a riveted rolling-packed body. Additionally, the -S magnet on this discontinued model interfaces with older CS1-M or DS1-M reed switches, while the MBL replacement transitions to the modern CMSG, DMSG, or EMSG sensor families.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X100-S-CA |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X100-S-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X100-S-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA Is Used
Packaging Flap Folder
Uses the 402N thrust at 0.5MPa to fold heavy cardboard carton flaps, with the CA pivot absorbing the slight angular arc as the mechanism closes.
Bottle Diverter Gate
Actuates a routing gate on a 100mm stroke to sort glass bottles on a conveyor, relying on the self-lubricating front-cover bearing to maintain smooth travel.
Pallet Push-off Arm
Pushes light palletized components into a wrapping station, where the 346N pull force reliably retracts the 12mm carbon-steel rod against friction.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA with MBL32X100-S-CA
To replace the MAL32X100-S-CA, order the MBL32X100-S-CA and verify the 32mm bore, 100mm stroke, PT port thread, and CA pivot back cover. Because your SKU includes the -S magnet, prepare to upgrade your sensing setup: the legacy CS1-M and DS1-M switches are retired, so select a current CMSG, DMSG, or EMSG sensor for the new body. If your application requires an adjustable air cushion rather than the standard fixed rubber bumper, step up to the MBLC variant on the current line.
For sizing context, stepping down to the 25mm bore drops the 0.5MPa push force to 245N, while stepping up to the 40mm bore increases it to 628N. With a 100mm stroke, the 12mm rod is susceptible to bending under side loads, so the CA pivot mounting is an excellent choice here to absorb angular misalignment. Remember that a plain cylinder does not hold a load when air pressure is lost; the bumper softens end-of-stroke impacts but acts as no lock, so add an external rod lock for vertical or gravity-loaded applications.
Upgrade checklist
- ✓ Order the MBL32X100-S-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X100-S-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA FAQ
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL32X100-S-CA, which provides identical bore, stroke, force, port, and mounting. The new model uses a riveted rolling-packed body instead of threaded covers, and you must switch from the old CS1-M/DS1-M switches to the CMSG/DMSG/EMSG sensor family for the -S magnet.
At 0.5MPa, the 32mm bore provides 402N push and 346N pull force. At 0.7MPa, the push force reaches 563N. The theoretical maximum force is 82kgf at 1.0MPa. The operating pressure range is 0.1-1.0MPa, and speed ranges from 30-800mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X100-S-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X100-S-CA → MBL32X100-S-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X100-S-CA replacement with price, stock and lead time, usually within 7-8 hours.