This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X130CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X130CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X130CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X130CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130CA
The AirTAC MAL32X130CA is a discontinued double-acting aluminum mini round cylinder. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa from a 32 mm bore. The exact drop-in replacement is the MBL32X130CA, which matches the original bore, stroke, output force, G1/8 port, and CA pivot mounting. This legacy cylinder features a fixed rubber bumper and a 12 mm carbon-steel rod with 20 µm hard chrome plating. A heterogeneous two-way seal retains grease for consistent friction, while the self-lubricating front-cover bearing guide supports the rod.
This specific SKU includes a CA pivot back cover, allowing the cylinder body to swing on a pin to absorb arcing loads. The original MAL body uses threaded front and back covers on the barrel, whereas the modern MBL replacement features a riveted rolling-packed body. Because this model lacks an -S suffix, it cannot accept a position sensor. If adjustable end-of-stroke cushioning is required, the current MBLC series offers that feature, as the MAL only has a bumper.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X130CA |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X130CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X130CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×130 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130CA Is Used
Package Divert Gate
Swings a sorting flap on a packaging conveyor using the CA pivot to absorb arcing motion, relying on 402 N push force at 0.5 MPa to move lightweight cardboard cartons.
Textile Loom Tensioner
Pivots a yarn tensioning arm on a weaving machine, where the 346 N pull force at 0.5 MPa maintains thread tension while the self-lubricating bearing handles rapid cycling.
Bin Lid Actuator
Opens and closes a hinged access cover on a textile loom, using the 130 mm stroke to clear the opening while the fixed rubber bumper softens the end of travel.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130CA with MBL32X130CA
To replace the MAL32X130CA, order the MBL32X130CA. Confirm your 130 mm stroke, G1/8 port, and PT tapered thread form. The CA pivot back cover is essential for arcing loads, so ensure your mounting pin accommodates the swing. Since this SKU lacks an -S magnet, it cannot accept a CS1-M or DS1-M sensor; if you need position detection on the MBL, add the -S suffix and use CMSG, DMSG, or EMSG switches. If you need to adjust the bore size, stepping down to the 25 mm bore yields 245 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628 N push at 0.5 MPa. A plain bumper does not hold loads when air is lost, so add an external rod lock for vertical applications. At 130 mm stroke, the 12 mm rod has low side-load tolerance, so use an external guide rail to prevent rod bending.
Upgrade checklist
- ✓ Order the MBL32X130CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X130CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130CA FAQ
Yes, the MAL32X130CA is discontinued. The exact drop-in replacement is the MBL32X130CA, which offers the same 32 mm bore, 130 mm stroke, force, G1/8 port, and CA pivot mounting. The MBL uses a riveted rolling-packed body instead of the threaded covers found on the MAL.
At 0.5 MPa it provides 402 N push and 346 N pull force, 563 N push at 0.7 MPa, and a maximum theoretical force of 82 kgf at 1.0 MPa. Because this specific SKU lacks an -S suffix, it cannot accept a position sensor; the MBL replacement with -S uses CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X130CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X130CA → MBL32X130CA)
Tell us the quantity and destination — we quote the drop-in MBL32X130CA replacement with price, stock and lead time, usually within 7-8 hours.