This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X150-CA-FA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X150-CA-FA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150-CA-FA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150-CA-FA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X150-CA-FA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X150-CA-FA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150-CA-FA
The AirTAC MAL32X150-CA-FA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 150mm stroke. It delivers 402N of push force and 346N of pull force at 0.5 MPa, making it a solid mid-range choice for compact automation. The exact drop-in replacement is the MBL32X150-CA-FA, which matches the original bore, stroke, output force, G1/8 port, and FA flange mounting exactly.
This legacy unit features a CA pivot back cover designed to swing on a pin for arcing motion, paired with an FA flange for secure front mounting. Because this specific SKU lacks the -S magnet option, it cannot accept a position sensor. The original MAL body used threaded front and back covers, whereas the modern MBL replacement features a riveted rolling-packed body for greater structural integrity. The MAL relies on a fixed rubber bumper to soften end-of-stroke impacts and does not offer adjustable cushioning; if your application requires shock tuning, you must step up to the current MBLC variant.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150-CA-FA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150-CA-FA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X150-CA-FA |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X150-CA-FA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X150-CA-FA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150-CA-FA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×150 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150-CA-FA Is Used
PCB Depaneling Router
Actuates a routing blade to singulate assembled circuit boards, utilizing the 402N push force at 0.5 MPa to cleanly cut through FR4 fiberglass substrates.
Carton Flap Folder
Folds the minor flaps on small packaging cartons passing along a conveyor, where the 150mm stroke provides the exact travel needed to clear the box height.
Sample Tube Transfer
Pushes a rack of test tubes from a loading dock into a centrifuge rotor, relying on the CA pivot to accommodate slight angular misalignment during the swing motion.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150-CA-FA with MBL32X150-CA-FA
To replace the MAL32X150-CA-FA, order the MBL32X150-CA-FA and verify your bore size, 150mm stroke, G1/8 port, and PT thread form. Confirm your FA flange and CA pivot accessories are intact, and note that because this SKU has no -S magnet, you cannot use CS1-M or DS1-M sensors. If you previously used those sensors on other cylinders, the MBL equivalent requires the newer CMSG, DMSG, or EMSG switch family. If you need adjustable air cushioning instead of the standard fixed rubber bumper, specify the MBLC32X150 model.
For sizing flexibility, stepping down to the 25mm bore yields 245N of push force at 0.5 MPa, while stepping up to the 40mm bore provides 628N of push force along with a larger G1/4 port. Since this is a 150mm stroke, the 12mm carbon-steel rod has limited tolerance for side loads; use the CA pivot to absorb angular misalignment or add an external guide rail to prevent rod bending. Remember that a plain double-acting cylinder does not hold its load when air pressure is lost—the rod will drift—so install an external pilot-operated check valve if position holding is critical.
Upgrade checklist
- ✓ Order the MBL32X150-CA-FA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X150-CA-FA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150-CA-FA FAQ
Yes, the AirTAC MAL series is discontinued. The exact drop-in replacement is the MBL32X150-CA-FA, which shares the identical 32mm bore, 150mm stroke, G1/8 port, FA flange, and CA pivot back cover. You can swap it directly without changing your mounting hardware.
At 0.5 MPa, the 32mm bore provides 402N of push force and 346N of pull force. At 0.7 MPa, the push force is 563N. The maximum theoretical force is 82 kgf at 1.0 MPa. Note that this specific -CA-FA SKU has no magnet, so it cannot support position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X150-CA-FA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X150-CA-FA → MBL32X150-CA-FA)
Tell us the quantity and destination — we quote the drop-in MBL32X150-CA-FA replacement with price, stock and lead time, usually within 7-8 hours.