This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X25-CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X25-CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X25-CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke25 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X25-CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-CA
The AirTAC MAL32X25-CA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 25mm stroke. It delivers 402N of push force and 346N of pull force at 0.5MPa. AirTAC replaced this legacy unit with the MBL32X25-CA, a drop-in alternative that matches the exact bore, stroke, output force, G1/8 port, and CA mounting.
This SKU features a CA pivot back cover that swings on a pin to absorb arcing rod loads. Because it lacks the -S option, this specific cylinder cannot accept a position sensor. The original MAL uses threaded front and rear covers, whereas the modern MBL body uses a riveted rolling-pack design. The MAL relies on a fixed rubber bumper for end-of-stroke damping; if your machine requires adjustable air cushioning, you must step up to the current-line MBLC variant.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X25-CA |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X25-CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X25-CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×25 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-CA Is Used
Packaging Flap Folder
Provides 402N of push force at 0.5MPa to actuate cardboard folder flaps on a continuous motion packaging conveyor.
Textile Loom Guide
Uses the CA pivot mount to swing a thread guide arm on a weaving loom, absorbing the arcing motion without binding the 12mm rod.
Parts Ejector Gate
Shifts a lightweight sorting gate to eject small plastic injection-molded parts into a bin using 346N of pull force.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-CA with MBL32X25-CA
To replace this discontinued MAL32X25-CA, order the MBL32X25-CA drop-in equivalent. Confirm your 32mm bore, 25mm stroke, PT tapered port threads, and CA pivot clevis mount. Because this SKU has no -S magnet, you cannot mount a position sensor on it. If you need sensing on the new MBL, you must add the -S option, which changes the sensor family from the legacy CS1-M / DS1-M to the modern CMSG / DMSG / EMSG switches. The fixed rubber bumper is not a lock; the rod will drift if air pressure drops. For a cushioned stop, use the MBLC.
If your application requires less force, step down to the 25mm bore (245N push at 0.5MPa). If you need more power, step up to the 40mm bore (628N push at 0.5MPa). At a 25mm stroke, side-load bending risks are minimal, but the 12mm carbon-steel rod with 20um hard chrome plating still relies on the self-lubricating front-cover bearing guide to maintain alignment.
Upgrade checklist
- ✓ Order the MBL32X25-CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X25-CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-CA FAQ
Yes, the MAL32X25-CA is discontinued. The exact drop-in replacement is the MBL32X25-CA, which matches the 32mm bore, 25mm stroke, 402N force, G1/8 port, and CA pivot mount. The new MBL uses a riveted rolling-packed body instead of threaded covers.
At 0.5MPa, it pushes with 402N and pulls with 346N. At 0.7MPa, it pushes with 563N. The maximum theoretical force is 82kgf at 1.0MPa. The fixed rubber bumper only softens the end of stroke; it does not hold the load if air is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X25-CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X25-CA → MBL32X25-CA)
Tell us the quantity and destination — we quote the drop-in MBL32X25-CA replacement with price, stock and lead time, usually within 7-8 hours.