This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X260CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X260CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260CA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260CA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X260CA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke260 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X260CA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260CA
The AirTAC MAL32X260CA is a discontinued double-acting aluminum mini round cylinder engineered for compact spaces. Delivering 402 N of push force and 346 N of pull force at 0.5 MPa, it utilizes a 12 mm carbon-steel rod with 20 um hard-chrome plating guided by a self-lubricating front-cover bearing. Because this legacy series has ended production, the exact drop-in replacement is the MBL32X260CA, matching the 32 mm bore, 260 mm stroke, G1/8 port, and CA mounting exactly.
Buyers should note two structural changes in the modern MBL upgrade. The original MAL features threaded front and back covers, whereas the MBL uses a riveted rolling-packed body for permanent assembly. Additionally, this specific MAL32X260CA lacks a built-in magnet, meaning it cannot accept any position sensor. If electronic detection is needed, an MBL equivalent with an S suffix must be ordered, which shifts the compatible switch family from the legacy CS1-M / DS1-M to the current CMSG / DMSG / EMSG series.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260CA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X260CA |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X260CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X260CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260CA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×260 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260CA Is Used
Pouch Packaging Diverter
Pushes light cardboard cartons on a packaging line using 402 N of thrust at 0.5 MPa, with the CA clevis allowing the rod to swing safely during the divert arc.
PCB Router Clamp
Holds a printed circuit board panel stationary during routing, utilizing the 260 mm stroke to reach across a wide workbed without consuming vertical space.
Textile Bobbin Loader
Advances empty bobbins into a winding cradle, where the self-lubricating bearing guide handles the repetitive 260 mm extension cycle without external grease.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260CA with MBL32X260CA
To replace the MAL32X260CA, order the MBL32X260CA. Confirm your 32 mm bore, 260 mm stroke, G1/8 port, PT thread, and CA pivot back cover. Because this SKU has no -S magnet, it cannot support a sensor; if you need end-of-stroke detection, step up to an MBL32X260SCA and use CMSG / DMSG / EMSG switches. The MAL relies on a fixed rubber bumper, so if your application requires adjustable end-cushioning, migrate to the MBLC32 variant on the current line.
For sizing flexibility, you can step down to the 25 mm bore (delivering 245 N push at 0.5 MPa) for lighter duties, or step up to the 40 mm bore (providing 628 N push at 0.5 MPa and a larger G1/4 port) for higher loads. With a 260 mm stroke, the 12 mm rod is susceptible to bending under lateral stress; use the CA clevis to absorb arcing loads, or install an external guide rail. Remember that a plain cylinder drifts when air is lost, so add a rod lock for suspended loads.
Upgrade checklist
- ✓ Order the MBL32X260CA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X260CA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260CA FAQ
Yes, the MAL32X260CA is discontinued. The exact drop-in replacement is the MBL32X260CA, which matches the 32 mm bore, 260 mm stroke, G1/8 port, and CA pivot. The MBL features a riveted rolling-packed body instead of the older threaded covers, but maintains the same force and mounting footprint.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force is 563 N, with a maximum theoretical force of 82 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X260CA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X260CA → MBL32X260CA)
Tell us the quantity and destination — we quote the drop-in MBL32X260CA replacement with price, stock and lead time, usually within 7-8 hours.