This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X65SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X65SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X65SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X65SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 65mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X65SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke65 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X65SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X65SCA
The AirTAC MAL32X65SCA is a discontinued double-acting aluminum mini round cylinder with a 32mm bore and 65mm stroke. It delivers 402N of push force at 0.5MPa. The exact drop-in replacement is the MBL32X65SCA, which matches the bore, stroke, output force, G1/8 port, and CA pivot mounting exactly. The legacy MAL features a threaded front and back cover assembly, whereas the current MBL utilizes a riveted rolling-packed body for equally robust performance.
This specific SKU includes a built-in magnet (-S) for position sensing and a CA pivot clevis back cover designed to absorb arcing loads. On the MAL, the magnet interfaces with older CS1-M or DS1-M reed switches; upgrading to the MBL means transitioning to the modern CMSG, DMSG, or EMSG sensor families. Internally, a heterogeneous two-way seal retains grease, and the carbon-steel rod features a 20um hard-chrome plating to resist wear.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X65SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X65SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X65SCA |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X65SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X65SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X65SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×65 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X65SCA Is Used
Packaging Flap Folder
Drives the mechanical arms on a carton erector to fold corrugated flaps, utilizing the 402N push force and CA pivot to accommodate the varying arc of the packaging linkage.
Bottle Sorting Diverter
Actuates a routing gate on a beverage filling line, where the 65mm stroke provides fast diversion and the self-lubricating bearing ensures millions of cycles without manual grease.
Pallet Tag Applicator
Pushes a pneumatic applicator head to press shipping labels onto pallet loads, relying on the 32mm bore's compact footprint to fit within tight conveyor guard clearances.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X65SCA with MBL32X65SCA
To replace the MAL32X65SCA, order the MBL32X65SCA. Confirm your 32mm bore, 65mm stroke, G1/8 port, and PT thread form are correct. The CA pivot back cover on this unit swings on a pin, making it ideal for loads that travel in an arc rather than a straight rigid line. Because this SKU has the -S magnet, note that your existing CS1-M or DS1-M switches will need to be swapped to CMSG, DMSG, or EMSG sensors on the new MBL body.
When sizing, verify if 402N push at 0.5MPa is sufficient. Stepping down to a 25mm bore drops the push force to 245N, while stepping up to a 40mm bore increases it to 628N. The MAL uses a fixed rubber bumper, so if your application requires end-of-stroke deceleration control, specify the MBLC variant on the current line for an adjustable air cushion. Remember that a plain cylinder does not hold its load when air pressure is lost; the rod will drift unless you add an external pilot-operated check valve or rod lock.
Upgrade checklist
- ✓ Order the MBL32X65SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X65SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X65SCA FAQ
Yes, the MAL32X65SCA is discontinued. The exact drop-in replacement is the MBL32X65SCA, which offers the same 32mm bore, 65mm stroke, G1/8 port, CA pivot, and -S magnet. The main change is that the MBL uses a riveted body instead of threaded covers, and you must update your sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG.
At 0.5 MPa, the 32mm bore provides 402N of push force and 346N of pull force. At 0.7 MPa, the push force increases to 563N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X65SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X65SCA → MBL32X65SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X65SCA replacement with price, stock and lead time, usually within 7-8 hours.