This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL32X85SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL32X85SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85SCA
The AirTAC Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85SCA is a double-acting aluminum-barrel mini round cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL32X85SCA, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke85 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → MBL32X85SCA
About the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85SCA
The AirTAC MAL32X85SCA is a discontinued double-acting aluminum mini round cylinder with a 32 mm bore and 85 mm stroke. It delivers 402 N of push force and 346 N of pull force at 0.5 MPa. The exact drop-in replacement is the MBL32X85SCA, matching the original bore, stroke, output, G1/8 port, and CA pivot mounting.
This legacy unit features a threaded front and back cover assembly, whereas the modern MBL replacement utilizes a riveted rolling-packed body for structural rigidity. Because this SKU includes the -S magnet, it originally paired with CS1-M or DS1-M reed switches; upgrading to the MBL requires switching to the current CMSG, DMSG, or EMSG sensor family. Internally, a heterogeneous two-way seal retains grease around the hard-chrome plated carbon steel rod, while the self-lubricating front-cover bearing guide reduces friction.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85SCA Technical Specifications
| Model | Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL32X85SCA |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL32X85SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The MBL32X85SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85SCA
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×85 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Where the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85SCA Is Used
Textile Loom Yarn Guide
Shifts a yarn guide arm across the weaving bed using 402 N of thrust, where the CA pivot absorbs the slight angular swing of the loom carriage.
Bottling Line Diverter
Pushes glass bottles onto a secondary packaging track with 346 N of pull force to retract the gate swiftly between 85 mm cycles.
PCB Router Clamp
Secures a printed circuit board panel during routing, using the -S magnet and a CS1-M sensor to confirm the clamp is fully closed before the spindle starts.
Replacing the Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85SCA with MBL32X85SCA
To replace the MAL32X85SCA, order the MBL32X85SCA and verify your 85 mm stroke, G1/8 port, and PT thread form. The CA pivot back cover on this unit swings on a pin to absorb arcing loads, so retain that mounting style if your mechanics require articulation. Since this model has the -S magnet, plan to swap your legacy CS1-M or DS1-M switches for CMSG, DMSG, or EMSG sensors.
If you need to adjust the force, step down to the 25 mm bore (245 N push at 0.5 MPa) for lighter duty, or step up to the 40 mm bore (628 N push at 0.5 MPa) for heavier loads. The fixed rubber bumper softens end-of-stroke impact but is not an adjustable cushion; choose the MBLC line if you need adjustable air cushioning. Remember that a plain cylinder drifts when air is lost, so add an external rod lock for suspended loads.
Upgrade checklist
- ✓ Order the MBL32X85SCA (same bore/stroke/force)
- ✓ Same G1/8 port and mounting accessories
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Need a cushion? use MBLC (adjustable air cushion)
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not intended for field disassembly.
- check Use the correct mounting accessory (LB / FA / SDB) and back cover (CA / U / CM).
- check For new builds, specify the MBL32X85SCA instead of this discontinued model.
Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85SCA FAQ
Yes, the MAL32X85SCA is discontinued. The exact drop-in replacement is the MBL32X85SCA, which matches the 32 mm bore, 85 mm stroke, G1/8 port, and CA pivot mounting. You must upgrade your CS1-M or DS1-M sensors to the CMSG, DMSG, or EMSG family for the new body.
At 0.5 MPa, the push force is 402 N and the pull force is 346 N. At 0.7 MPa, the push force increases to 563 N. The maximum theoretical force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBL32X85SCA replaces this model 1:1.
Fast Dispatch
MBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBL Replacements
Request a Quote (Airtac MAL32 Aluminum Alloy Mini Air Cylinder MAL32X85SCA → MBL32X85SCA)
Tell us the quantity and destination — we quote the drop-in MBL32X85SCA replacement with price, stock and lead time, usually within 7-8 hours.