This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X260U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X260U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X260U (Discontinued) -> MBL40X260U is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 260mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X260U, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X260U is a discontinued double-acting aluminum mini round cylinder with a 40mm bore and 260mm stroke. Delivering 628N of push force at 0.5MPa, it was built with threaded front and back covers. The exact drop-in replacement is the MBL40X260U, which matches the original bore, stroke, force, G1/4 port, and U flat-end back cover.
This legacy unit lacks a built-in magnet, meaning it cannot support position sensing. The MBL40X260U upgrade features a riveted rolling-packed body instead of the original threaded covers. Both utilize a fixed rubber bumper for end-of-stroke deceleration rather than an adjustable air cushion.
| Model | AirTAC MAL40X260U (Discontinued) -> MBL40X260U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X260U |
| Bore size | Ø40 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X260U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X260U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×260 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Ejects empty pallets in packaging lines using 628N of push force at 0.5MPa over a 260mm travel distance.
Opens and closes heavy machine tool doors, utilizing the 16mm hard-chrome plated carbon steel rod for rigid transfer.
Folds major flaps on large corrugated cartons prior to sealing, relying on the flat-end U back cover for stable rigid mounting.
To replace the MAL40X260U, order the MBL40X260U and confirm your G1/4 port, PT thread, and U flat-end back cover. If you need to step down in force, the 32mm bore provides 402N push at 0.5MPa; stepping up is not an option as 40mm is the largest MAL size. Because this 260mm stroke exceeds 300mm, use a CA pivot or an external guide to prevent rod bending from side loads. The fixed rubber bumper is not a position lock; use a pilot-operated check valve to hold loads if air drops. If an adjustable air cushion is required, specify the MBLC40X260U on the current line.
Upgrade checklist
Yes, the MAL40X260U is discontinued. The exact drop-in replacement is the MBL40X260U, which matches the 40mm bore, 260mm stroke, 628N force, G1/4 port, and U back cover. The MBL uses a riveted body instead of threaded covers.
At 0.5MPa it provides 628N push and 528N pull force, 880N push at 0.7MPa, and a maximum theoretical force of 128kgf at 1.0MPa. Because this specific SKU lacks the -S magnet, it cannot take a position sensor; the MBL40X260S uses CMSG/DMSG/EMSG switches.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X260U replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X260U replacement with price, stock and lead time, usually within 7-8 hours.