This model is discontinued
AirTAC has phased out the MAL series. You can still order this code here: we ship the direct replacement MBL40X65CM, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC MAL40X65CM (Discontinued) → MBL40X65CM is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 65mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the direct replacement is the MBL40X65CM, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X65CM is a discontinued double-acting aluminum mini round cylinder delivering 628N push and 528N pull at 0.5MPa. It features a 40mm bore, 65mm stroke, and a CM round-end back cover. AirTAC replaced this legacy unit with the MBL40X65CM, a direct alternative retaining the exact force, G1/4 port, and mounting footprint.
Unlike the threaded covers on this MAL, the MBL replacement uses a riveted rolling-packed body. The 16mm carbon-steel rod has 20um hard chrome plating, and a heterogeneous two-way seal retains grease for long service life. Because this SKU lacks a magnet, it cannot accept a position sensor.
| Model | AirTAC MAL40X65CM (Discontinued) → MBL40X65CM |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X65CM |
| Bore size | Ø40 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X65CM carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X65CM produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×65 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Provides 628N of push at 0.5MPa to eject small plastic parts from tight mold cavities without requiring a large ISO 15552 body.
Uses the 65mm stroke and CM round-end cover to pivot and redirect flat-bottomed pallets on a compact handling line.
Applies 528N of pull force to cycle a sealing jaw mechanism, fitting neatly within the narrow frame of end-of-line packaging machines.
To replace the MAL40X65CM, order the MBL40X65CM and verify the 40mm bore, 65mm stroke, PT port thread, and CM round-end back cover. If you need to step down, the 32mm bore yields 402N push at 0.5MPa; stepping up is not possible as 40mm is the largest MAL mini round size. The fixed rubber bumper softens end-of-stroke impact, but if you need adjustable cushioning, choose the current MBLC line. Remember that a plain cylinder drifts when air is lost, so use an external rod lock to hold loads.
Upgrade checklist
Yes, the MAL40X65CM is discontinued. The direct replacement is the MBL40X65CM, which matches the 40mm bore, 65mm stroke, 628N force, G1/4 port, and CM mounting. The MBL uses a riveted body instead of threaded covers.
At 0.5MPa it delivers 628N push and 528N pull. At 0.7MPa push is 880N, with a theoretical maximum of 128kgf at 1.0MPa. The port size is G1/4, the rod is 16mm, and it operates at 30-800mm/s.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X65CM replaces this model 1:1.
MBL replacements are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the direct MBL40X65CM replacement with price, stock and lead time, usually within 7-8 hours.