This model is discontinued
AirTAC has phased out the MALD series. You can still order this code here: we ship the direct replacement MBLD32X100-LB, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLD replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X100-LB
The AirTAC MALD Aluminum Alloy Mini Cylinder MALD32X100-LB is a double-acting, double-rod aluminum mini cylinder: a rod exits both ends of the Ø32mm bore, so push and pull force are equal. This model is discontinued — the direct replacement is the MBLD32X100-LB, matching bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- StatusDiscontinued → MBLD32X100-LB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X100-LB
The AirTAC MALD32X100-LB is a discontinued double-acting, double-rod miniature cylinder. A rod exits both ends of the 32mm bore, yielding equal force in both directions at 346N each way at 0.5MPa. The direct replacement is the MBLD32X100-LB, matching the 100mm stroke, G1/8 port, and LB foot mount.
This configuration uses an LB foot mounting bracket and lacks a magnet, meaning it cannot accept position sensors. The original MALD features threaded covers and a fixed rubber bumper, while the MBLD upgrade transitions to a riveted rolling-packed body. Twin rods double the bearing area to resist side loads and prevent rod rotation during guided movements.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X100-LB Technical Specifications
| Model | Airtac MALD Aluminum Alloy Mini Cylinder MALD32X100-LB |
|---|---|
| Series | MALD double-rod mini cylinder (discontinued) |
| Replacement | MBLD32X100-LB |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod types have no back-cover code and no SDB pivot; mount on the body, LB foot or FA flange. The MBLD32X100-LB carries the same ratings.
Output Force — Equal Both Ways (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
A rod exits both ends, so the effective area — and force — is equal in both directions. The MBLD32X100-LB matches these values.
Model Code: Airtac MALD Aluminum Alloy Mini Cylinder MALD32X100-LB
| MALD | Double-rod aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×100 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLD uses CMSG/DMSG/EMSG). |
Replacement: MALD → MBLD. No back-cover (CA/U/CM) and no SDB on double-rod. Mounting: LB / FA.
Where the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X100-LB Is Used
PCB Edge Guiding
Drives a symmetrical edge guide on a conveyor using 346N of equal force both ways, ensuring delicate circuit boards are centered without rotational drift.
Film Web Spreader
Uses the twin-rod anti-rotation feature to steadily extend a spreading blade across packaging film, maintaining tracking accuracy over the 100mm stroke.
Dual-End Pick Place
Mounts a pickup tool on the front rod and a mechanical cam on the rear rod, synchronizing two separate assembly actions with one 32mm bore actuator.
Replacing the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X100-LB with MBLD32X100-LB
To replace this MALD32X100-LB, specify the MBLD32X100-LB and confirm the 32mm bore, 100mm stroke, G1/8 port, PT thread, and LB foot mount. This SKU has no -S magnet, so it cannot support a sensor; if sensing is needed, switch to an MBLD32X100S-LB and use CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M. Size using the equal push and pull force of 346N at 0.5MPa. To step down, the 25mm bore provides 206N at 0.5MPa; to step up, the 40mm bore provides 528N at 0.5MPa. At 100mm stroke, side loading is minimal, but ensure the LB feet are aligned to avoid binding.
Upgrade checklist
- ✓ Order the MBLD32X100-LB (same bore/stroke/force)
- ✓ Force equal both ways (346 N at 0.5 MPa)
- ✓ Twin rods for anti-rotation / rear flag
- ✓ No back cover / SDB — plan a body or FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Protect both rod ends from side load on long strokes.
- check No back-cover / SDB on double-rod — use body / FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLD32X100-LB instead of this discontinued model.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X100-LB FAQ
Yes, the MALD32X100-LB is discontinued. The direct replacement is the MBLD32X100-LB, which matches the 32mm bore, 100mm stroke, G1/8 port, and LB foot mount. The MBLD uses a riveted rolling-packed body instead of the original threaded covers.
Force is equal both ways: 346N at 0.5MPa, 484N at 0.7MPa, and a maximum of 70kgf at 1.0MPa. It uses a fixed rubber bumper to soften end impacts, but it is not a lock and cannot hold a load on air loss. Because this specific SKU lacks a magnet, it cannot accept position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLD32X100-LB replaces this model 1:1.
Fast Dispatch
MBLD replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLD Replacements
Request a Quote (Airtac MALD Aluminum Alloy Mini Cylinder MALD32X100-LB → MBLD32X100-LB)
Tell us the quantity and destination — we quote the direct MBLD32X100-LB replacement with price, stock and lead time, usually within 7-8 hours.