This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBLD32X300-S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBLD32X300-S in place of this model. The MBLD replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X300-S
The AirTAC Airtac MALD Aluminum Alloy Mini Cylinder MALD32X300-S is a double-acting, double-rod aluminum mini cylinder: a rod exits both ends of the Ø32mm bore, so push and pull force are equal. This model is discontinued — the drop-in replacement is the MBLD32X300-S, matching bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke300 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- StatusDiscontinued → MBLD32X300-S
About the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X300-S
The AirTAC MALD32X300-S is a discontinued double-acting, double-rod mini cylinder. A rod exits both ends, so the annulus area is identical on both sides, delivering equal 346 N push and pull force at 0.5 MPa. The exact drop-in replacement is the MBLD32X300-S, matching the 32mm bore, 300mm stroke, G1/8 port, and mounting.
This -S SKU includes a magnet for CS1-M / DS1-M switches; the MBLD upgrade shifts to CMSG / DMSG / EMSG sensors. The MALD uses threaded covers, while the MBLD features a riveted rolling-packed body. It has no back cover or SDB option, mounting directly via the body, FA flange, or LB foot. End-of-travel relies on a fixed rubber bumper, not an adjustable cushion.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X300-S Technical Specifications
| Model | Airtac MALD Aluminum Alloy Mini Cylinder MALD32X300-S |
|---|---|
| Series | MALD double-rod mini cylinder (discontinued) |
| Replacement | MBLD32X300-S |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod types have no back-cover code and no SDB pivot; mount on the body, LB foot or FA flange. The MBLD32X300-S carries the same ratings.
Output Force — Equal Both Ways (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
A rod exits both ends, so the effective area — and force — is equal in both directions. The MBLD32X300-S matches these values.
Model Code: Airtac MALD Aluminum Alloy Mini Cylinder MALD32X300-S
| MALD | Double-rod aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×300 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLD uses CMSG/DMSG/EMSG). |
Replacement: MALD → MBLD. No back-cover (CA/U/CM) and no SDB on double-rod. Mounting: LB / FA.
Where the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X300-S Is Used
PCB Router Z-Axis
Drives a spindle carriage on a printed circuit board router. The twin rods prevent rotational drift during 300mm plunges, ensuring the 346 N force stays perfectly vertical for accurate milling depth.
Textile Beam Loom
Actuates a tensioning gate on a weaving loom. The equal push-pull force keeps the warp beam stable, while the rear rod carries a physical cam that triggers a mechanical drop-out switch at stroke ends.
Foam Extruder Cut-off
Stages a flying knife carriage on a continuous foam extrusion line. The double-rod design doubles the bearing surface to handle the 300mm span, resisting knife drag without binding.
Replacing the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X300-S with MBLD32X300-S
To replace the MALD32X300-S, install the MBLD32X300-S. Confirm the 32mm bore, 300mm stroke, G1/8 port, PT thread, and LB/FA mounting. You must also swap your CS1-M / DS1-M sensors for the CMSG / DMSG / EMSG family. Size your loads using the equal 346 N force at 0.5 MPa (484 N at 0.7 MPa, 70 kgf max).
If you need to step down, the 25mm bore provides 206 N at 0.5 MPa. Stepping up to the 40mm bore yields 528 N at 0.5 MPa. Because this 300mm stroke is long, use an external guide to prevent rod side-loading and premature seal wear.
Upgrade checklist
- ✓ Order the MBLD32X300-S (same bore/stroke/force)
- ✓ Force equal both ways (346 N at 0.5 MPa)
- ✓ Twin rods for anti-rotation / rear flag
- ✓ No back cover / SDB — plan a body or FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Protect both rod ends from side load on long strokes.
- check No back-cover / SDB on double-rod — use body / FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLD32X300-S instead of this discontinued model.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X300-S FAQ
Yes, the MALD32X300-S is discontinued. The exact drop-in replacement is the MBLD32X300-S, which matches the 32mm bore, 300mm stroke, G1/8 port, and mounting. You must upgrade your sensors from the old CS1-M / DS1-M switches to the CMSG / DMSG / EMSG family.
Because a rod exits both ends, the piston sees the same annulus area on both sides. This yields 346 N push and 346 N pull at 0.5 MPa, 484 N each way at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa. The fixed rubber bumper softens end impact but provides no air-loss holding force.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The MBLD32X300-S replaces this model 1:1.
Fast Dispatch
MBLD replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLD Replacements
Request a Quote (Airtac MALD Aluminum Alloy Mini Cylinder MALD32X300-S → MBLD32X300-S)
Tell us the quantity and destination — we quote the drop-in MBLD32X300-S replacement with price, stock and lead time, usually within 7-8 hours.