Airtac MARF Stainless Steel Mini Air Cylinder MARF25X60S
The AirTAC MARF Stainless Steel Mini Air Cylinder MARF25X60S is a genuine double acting + cushion (front mount) standard round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting + cushion (front mount)
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MARF Stainless Steel Mini Air Cylinder MARF25X60S
Built on a riveted stainless round barrel with a hard-chrome plated 10 mm rod, the MARF25X60S stands up to washdown corners where painted mini cylinders blister. The front-flange bracket is part of the cover itself, so mounting is two bolts into the machine plate. On 0.15-1.0 MPa (22-145 psi) air it pushes 245 N at 0.5 MPa, peaking at 343 N.
Dial the twin needle screws on first run and the variable cushion at each end absorbs stop shock, letting you run the 60 mm stroke faster. The piston magnet is factory-fitted for CMSG / DMSG / EMSG switches.
Airtac MARF Stainless Steel Mini Air Cylinder MARF25X60S Technical Specifications
| Model | Airtac MARF Stainless Steel Mini Air Cylinder MARF25X60S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion (front mount) |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARF Stainless Steel Mini Air Cylinder MARF25X60S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| F | Front-cover mount: F = front-flange mounting. |
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (double rod, adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARF Stainless Steel Mini Air Cylinder MARF25X60S Is Used
PCB panel eject
Ejects routed PCB panels off a router vacuum bed; 245 N clears adhesive residue without marking the panel edge.
Carton divert gate
Swings a divert gate at a sortation spur, the 60 mm throw matching the lane gap on a 245 N push.
Hopper lid raise
Lifts a small hopper inspection lid against a light counterweight, cushioning the top-of-travel stop.
Is the Airtac MARF Stainless Steel Mini Air Cylinder MARF25X60S the Right Cylinder?
The 20 mm bore tops out at 157 N push, so once a load needs more than about 150 N of working force this 25 mm unit at 245 N is the step up; heavy pushes beyond 400 N move to the 32 mm at 402 N. Air loss lets the rod drift - the cushion softens the ends only, it never holds position - so add a rod lock for suspended loads. If the machine needs a double rod to guide or push from two faces, look at MACD; for an adjustable stroke window, MACJ.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARF Stainless Steel Mini Air Cylinder MARF25X60S FAQ
It pushes 245 N and pulls 206 N at 0.5 MPa; at 0.7 MPa that becomes 343 N push and 289 N pull. Theoretical maximum is 50 kgf at 1.0 MPa, on a 10 mm rod with M10x1.25 thread and 1/8 inch ports.
First-run tuning of the twin cushion needles sets how hard the rod lands at each end. With the variable air cushion set, you can push speeds up to 800 mm/s or add load without hammering the aluminium covers.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARF Stainless Steel Mini Air Cylinder MARF25X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.