Airtac MARF Stainless Steel Mini Air Cylinder MARF32X600S
The AirTAC Airtac MARF Stainless Steel Mini Air Cylinder MARF32X600S is a genuine double acting + cushion (front mount) standard round-body mini air cylinder with a Ø32mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ32 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion (front mount)
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MARF Stainless Steel Mini Air Cylinder MARF32X600S
When the work sits half a metre away, this Dia 32 unit reaches it: the MARF32X600S extends 600 mm from a front flange that is part of the cylinder itself. Thrust is 402 N forward and 346 N back at 0.5 MPa, and since 600 mm sits past the 500 mm standard limit for this bore, the barrel is produced to that length on request.
A 600 mm stroke magnifies any misalignment, but the variable cushion at each end still quiets the last part of travel, and the stainless barrel with its hard-chrome-plated rod stands up to humid or washed-down surroundings. Practical sizing: about 241 N of usable force at 0.5 MPa, enough to raise roughly 20.5 kg vertically at a 2:1 margin.
Airtac MARF Stainless Steel Mini Air Cylinder MARF32X600S Technical Specifications
| Model | Airtac MARF Stainless Steel Mini Air Cylinder MARF32X600S |
|---|---|
| Series | MAR mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion (front mount) |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MARF Stainless Steel Mini Air Cylinder MARF32X600S
| MAR | Standard round-body mini cylinder (double-acting, integrated mount, variable cushion). |
|---|---|
| F | Front-cover mount: F = front-flange mounting. |
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MARF Stainless Steel Mini Air Cylinder MARF32X600S Is Used
Deep-shelf tote ejector
The full 600 mm push slides a tote off the back of a deep picking shelf without the cylinder reaching into the rack.
Sliding guard-door lift
Flange-up mounting raises a machine guard door; the stainless barrel resists the cutting grit and coolant mist that scar painted tubes.
Wash-chamber rack ram
Pushes sample racks into a laboratory washer; daily moisture and detergent spray are no problem for the chromed rod and riveted body.
Is the Airtac MARF Stainless Steel Mini Air Cylinder MARF32X600S the Right Cylinder?
A Dia 25 cylinder of the same family only manages 245 N at 0.5 MPa, while a Dia 40 delivers 628 N - if your load is marginal at Dia 32, move up a bore rather than raising pressure. Over this length the slim 12 mm rod will deflect under side load, so guide the load externally or hang it from an I or Y knuckle on the M10x1.25 thread. The rod also floats free when air is cut, so add a rod lock if the extended position has to be kept.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MARF Stainless Steel Mini Air Cylinder MARF32X600S FAQ
The full force set is available at every point of travel: 402 N push and 346 N pull at 0.5 MPa, rising to 563 N and 484 N at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa. Supply 0.15-1.0 MPa (22-145 psi) of 40 um filtered air.
No. The standard stroke ceiling for the Dia 32 MAR is 500 mm, so 600 mm is produced to your specification with the same front flange, dual cushion and built-in magnet features.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MARF Stainless Steel Mini Air Cylinder MARF32X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.