
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X15U is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 15mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X15U is a compact double-acting aluminum mini round cylinder engineered for exceptionally tight machine spaces. With a 20mm bore and a short 15mm stroke, it generates 157 N of push force and 132 N of pull force at 0.5 MPa. The U suffix designates a rigid flat-end rear cover, providing a stable fixed mounting footprint for precise, short-travel positioning tasks.
Unlike tie-rod bodies, this cylinder uses a riveted rolling-packed aluminum barrel where the covers are crimped to the tube, creating a lightweight, permanently sealed assembly. Inside, a heterogeneous two-way piston seal retains grease for long service life, while the Ø8 mm carbon-steel piston rod features 20 µm hard-chrome plating to resist wear and corrosion. Note that because this specific SKU lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X15U |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Provides a rapid 15mm extension to push delicate printed circuit boards out of test fixtures, using the 157N force at 0.5 MPa without damaging the board surface.
Actuates a short-stroke flap gate on a conveyor to sort lightweight plastic injection-molded components into secondary packaging lanes.
Indexes 96-well microplates in compact laboratory automation by driving a tiny pusher block exactly 15mm to align the plate under a dispensing head.
This 20mm bore model is the smallest available in the MBL series, making it the go-to choice when footprint is the primary constraint. If your application requires slightly more power, stepping up to the 25mm bore yields 245 N of push force at 0.5 MPa, but increases the physical envelope. The base MBL relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion; for higher cycling speeds or heavier moving masses, consider the MBLC variant. Keep in mind that the rubber bumper only absorbs shock and does not lock the rod—if air pressure is lost, the cylinder cannot hold its position and will drift, requiring an external pilot-operated check valve for load holding. The replacement match for this SKU is a 20mm bore, 15mm stroke, G1/8 port with PT thread, U flat-end back cover, and no magnet.
Quick checklist
At 0.5 MPa, this double-acting cylinder provides 157 N of push force and 132 N of pull force. At 0.7 MPa, the push force increases to 220 N, with a theoretical maximum of 32 kgf at 1.0 MPa. It operates at a speed of 30-800 mm/s.
No, because this SKU lacks the -S magnet suffix, it cannot accommodate CMSG, DMSG, or EMSG electronic or reed sensor switches. Additionally, the base MBL uses a fixed rubber bumper for end-of-stroke damping rather than an adjustable cushion; if you need adjustable air cushioning, you must select the MBLC variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.