verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MBL Series · Aluminum-Barrel Mini Cylinder

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X225SCA

The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X225SCA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 225mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.

  • BoreØ20 mm
  • Stroke225 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM8×1.25
  • CushionRubber bumper (MBLC variant: adjustable air cushion)
$27.21 $34.71Save 21% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every MBL20 stroke, mounting and version on one page All MBL20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X225SCA

The AirTAC MBL20X225SCA is a double-acting aluminum mini round cylinder engineered for tight machine spaces. Operating at 0.5 MPa, it provides 157 N of push force and 132 N of pull force across a 225 mm stroke. This specific SKU features a CA pivot (clevis) back cover, allowing the cylinder body to swing on a pin to safely absorb arcing and angular loads during motion. It also includes a built-in magnet (-S) for use with CMSG, DMSG, or EMSG sensor switches to track rod position.

Unlike tie-rod bodies, this unit uses a riveted rolling-packed barrel where the covers are crimped to the tube, making it exceptionally light and compact but not designed to be disassembled. It relies on a fixed rubber bumper at the end of stroke to soften impact rather than an adjustable cushion screw. Additionally, the carbon-steel piston rod features a 20 um hard-chrome plating for wear and corrosion resistance, paired with a heterogeneous two-way piston seal that retains grease for a long service life.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X225SCA Technical Specifications

ModelAirtac MBL Aluminum Alloy Mini Cylinder MBL20X225SCA
SeriesMBL aluminum-barrel mini round cylinder
Bore sizeØ20 mm
Stroke225 mm
Acting typeDouble acting
Port size1/8"
Rod threadM8×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionRubber bumper (MBLC variant: adjustable air cushion)
Max strokeUp to 500 mm

Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa157 N132 N
0.7 MPa220 N—
Max (@1.0 MPa)32 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MBL Aluminum Alloy Mini Cylinder MBL20X225SCA

MBLAluminum-barrel mini round cylinder, double acting.
20Bore size in mm.
×225Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).

Where the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X225SCA Is Used

precision_manufacturing

Textile Yarn Guide

Shifts a yarn guide arm across a winding machine using 157 N of push force, where the CA clevis accommodates the pivot arc of the traversing mechanism.

inventory_2

PCB Sorting Diverter

Pivots a small reject gate on a PCB conveyor to kick defective boards into a side chute, utilizing the 225 mm stroke and -S magnet for position confirmation.

memory

Electronic Component Test

Swings a testing probe array into position over a semiconductor wafer, where the lightweight aluminum body minimizes moving mass on the precision gantry.

Is the Airtac MBL Aluminum Alloy Mini Cylinder MBL20X225SCA the Right Cylinder?

If you need less force, step down to the 32 bore which offers 402 N at 0.5 MPa; if you need more, step up to the 40 bore providing 628 N. Because this 225 mm stroke is substantial for an Ø8 mm rod, the cylinder has low side-load tolerance and the rod bearing can bend under lateral stress. The CA pivot back cover on this model is highly recommended here, as it accommodates slight misalignment, though an external guide or the MBLD double-rod type offers even greater anti-rotation stability for long moves. Keep in mind the fixed rubber bumper only softens end-of-stroke impact; it does not hold the load. If air pressure is lost or the valve is centred, the rod will drift or drop, so fit an external rod lock or pilot-operated check valve if position holding is critical. For exact replacement matching, specify: 20 mm bore, 225 mm stroke, G1/8 port size, PT thread form, CA back cover, and the -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MBL Aluminum Alloy Mini Cylinder MBL20X225SCA FAQ

This 20 mm bore cylinder delivers 157 N push and 132 N pull at 0.5 MPa, 220 N push at 0.7 MPa, and a maximum theoretical force of 32 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.

No, the base MBL uses a fixed rubber bumper to soften end-of-stroke impact and does not have an adjustable cushion screw. If your application requires adjustable air cushioning for heavier or faster moving loads, you should select the MBLC variant instead.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC MBL Cylinders

Request a Quote for Airtac MBL Aluminum Alloy Mini Cylinder MBL20X225SCA

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for MBL20X225SCA and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.