
The AirTAC MBL Aluminum Alloy Mini Cylinder MBL20X430SCA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø20mm bore and 430mm stroke, 1/8" air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL20X430SCA is a double-acting aluminum mini round cylinder engineered for compact installations. Delivering 157 N push and 132 N pull force at 0.5 MPa, this 20 mm bore, 430 mm stroke unit is built for tight machinery spaces. The riveted rolling-packed barrel permanently crimps the covers to the tube, creating an ultra-light assembly that is not designed to be disassembled like a traditional tie-rod cylinder. The carbon-steel piston rod features a 20 um hard-chrome plating to resist wear and corrosion.
This specific SKU includes a built-in magnet (-S) for compatibility with AirTAC CMSG reed and DMSG or EMSG solid-state sensor switches to track rod position. It is fitted with a CA pivot back cover, allowing the cylinder body to swing freely on a pin to accommodate arcing or angular loads. End-of-stroke deceleration relies on a fixed rubber bumper rather than an adjustable cushion screw.
| Model | Airtac MBL Aluminum Alloy Mini Cylinder MBL20X430SCA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø20 mm |
| Stroke | 430 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 20 | Bore size in mm. |
| ×430 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Drives a pivoting yarn guide arm across a weaving machine, utilizing the CA clevis to handle the arcing travel path while keeping the 157 N push force aligned through the 430 mm stroke.
Swings corrugated carton side flaps inward on a packaging line, where the compact 20 mm aluminum body fits between conveyor rollers and the magnet confirms fold completion.
Actuates a small pivot gate to route printed circuit boards between two processing lanes, using the DMSG solid-state sensor to signal the control system when the 430 mm stroke reaches full extension.
With a 157 N push force at 0.5 MPa, this bore handles light part positioning. If you need less force, the next size down does not exist in the MBL range, so 20 mm is the minimum. If your application requires more power, stepping up to the 25 mm bore yields 245 N push and 206 N pull at 0.5 MPa. For faster or heavier cycling where end-impact is a concern, consider the MBLC variant for its adjustable air cushion. If the mechanism only requires air to extend or retract a load, the MSBL or MTBL single-acting cylinders offer a simpler footprint.
Because the 430 mm stroke is substantial for an Ø8 mm rod, side-load tolerance is low and the rod bearing is susceptible to bending under lateral forces. An external linear guide is strongly recommended to prevent premature seal wear. The CA clevis mount on this unit helps absorb angular misalignment, but for strict anti-rotation requirements, the MBLD double-rod type is a better choice. Note that the fixed rubber bumper softens impact but does not hold the load; if air pressure drops, the rod will drift, so a pilot-operated check valve is needed for position holding. Replacement requires matching the 20 mm bore, 430 mm stroke, G1/8 port, PT thread, CA back cover, and -S magnet.
Quick checklist
This 20 mm bore cylinder delivers a push force of 157 N and a pull force of 132 N at 0.5 MPa. At 0.7 MPa, the push force increases to 220 N, with a maximum theoretical force of 32 kgf at 1.0 MPa. The operating speed ranges from 30 to 800 mm/s.
No, the base MBL20X430SCA uses a fixed rubber bumper to soften end-of-stroke impact and does not feature an adjustable cushion screw. If your application requires adjustable air cushioning for heavier or faster moving loads, you should select the MBLC variant instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.