Airtac MD Multi-Position Clamping Cylinder MD20X15SH
The AirTAC MD Multi-Position Clamping Cylinder MD20X15SH is a genuine MD multi-mount cylinder (double acting), 20 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 157.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double acting
- SeriesMD (standard)
- Bore20 mm
- Push thrust @0.5 MPa157.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MD Multi-Position Clamping Cylinder MD20X15SH
The MD20X15SH is an AirTAC MD-series multi-mount cylinder: a compact square-body, double-acting unit that fixes from six directions - front, back, left, right, top and bottom - so it bolts to any free face of a machine plate and mounts side by side with identical units to save space. This 20mm bore model pushes with a theoretical 157.1 N at 0.5 MPa on a 15mm stroke, running 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi). Cushioning is a bumper, magnetic-switch slots surround the body, and guide precision is high without added lubrication.
This is a genuine AirTAC part from the standard MD family, where the rod rotates unless guided externally; the MK family is the no-rotating alternative. The trailing S means the magnet is fitted as the SKU shows, and the thread is PT on the M5x0.8 port. The further H suffix is not one of the standard magnet (S) or thread (G) codes here, so confirm what it specifies from the datasheet - we will check dimensions and sizing with you on request.
Airtac MD Multi-Position Clamping Cylinder MD20X15SH Technical Specifications
| Model | Airtac MD Multi-Position Clamping Cylinder MD20X15SH |
|---|---|
| Type | Multi-mount cylinder, double acting |
| Series | MD (standard) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 157.1 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the 20mm bore when the job needs roughly 157.1 N of push at 0.5 MPa on the double-acting push side (the pull side delivers 131.9 N). MD is the standard multi-mount family, so choose it over MK when the load may rotate with the rod. The 15mm stroke sits comfortably in the bore-20 table, which runs to 60mm, but the short covers favor modest strokes - do not over-extend beyond the task. The S suffix means the magnet is fitted for use with the body's switch slots, and the thread is PT on an M5x0.8 port as coded; order G for a G thread. Route any side-load requirement to us, and confirm the H suffix meaning from the datasheet before ordering.
Applications
Jig positioning
Feed a jig or locator into place with a short, precise push on the fixture plate. Six-way fixing means the cylinder mounts from whichever face of the jig is available.
Slide positioning
Position or hold a small slide or carriage in a compact mechanism. The fitted magnet pairs with the switch slots around the body so end positions can be detected.
Small-parts clamp
Clamp a small housing or bracket during a secondary operation. Side-by-side mounting lets multiple clamp cylinders share one plate, and the bumper cushions each clamp stroke.
FAQ
Does MD20X15SH include a magnet, and which thread does it use?
Yes - the trailing S means the magnet is fitted, so it works with the magnetic-switch slots around the body. With no G suffix the thread is PT on the M5x0.8 port, which is standard for this 20mm bore.
Where do I find dimensions and side-load limits for this cylinder?
Both come from the datasheet: overall dimensions depend on the stroke, and allowable side load is not published as a general figure here. Ask us and we will confirm the details, including what the trailing H suffix specifies, on request.