Airtac MD Multi-Position Clamping Cylinder MD20X30SH
The AirTAC MD Multi-Position Clamping Cylinder MD20X30SH is a genuine MD multi-mount cylinder (double acting), 20 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 157.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double acting
- SeriesMD (standard)
- Bore20 mm
- Push thrust @0.5 MPa157.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MD Multi-Position Clamping Cylinder MD20X30SH
The MD20X30SH combines a double acting 20 mm bore and 30 mm stroke with the multi-mount square body that AirTAC fixes from six directions: front, back, left, right, top and bottom. Mounting cylinders side by side saves machine space, the 20 mm bore delivers a theoretical 157.1 N push at 0.5 MPa, and an elastic bumper cushions travel.
A genuine AirTAC part in the standard MD family (the MK family adds a no-rotating plate where the rod must not turn), this SKU carries the magnet option shown by the S suffix and PT thread ports. We are happy to confirm dimensions and sizing from the datasheet before you order.
Airtac MD Multi-Position Clamping Cylinder MD20X30SH Technical Specifications
| Model | Airtac MD Multi-Position Clamping Cylinder MD20X30SH |
|---|---|
| Type | Multi-mount cylinder, double acting |
| Series | MD (standard) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 157.1 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore sets the force: at 0.5 MPa the 20 mm bore pushes with a theoretical 157.1 N. MD keeps the standard rotating rod; MK adds a no-rotating plate. The 30 mm stroke fits the bore 20 table (max 60 mm) - keep strokes modest because of the short-cover design, and confirm anything unusual with us. Magnet (S) and thread (PT or G) are the remaining choices; side-load data comes from the datasheet.
Applications
Compact workholding
Row several cylinders side by side on a fixture plate to clamp multiple small workpieces in one station, saving fixture width.
Product diverting
Mount the body beneath a belt or chute to kick lightweight products onto a spur or reject lane in a 30 mm motion.
Bench test rig actuation
Apply a controlled push force in laboratory and test rigs where the six-direction fixing helps fit the cylinder into a tight frame.
FAQ
Why choose the 20 mm bore for a job like this?
The bore sets the force. This 20 mm double acting cylinder gives a theoretical push thrust of about 157.1 N at 0.5 MPa, a little less on the pull side. If you need more or less force, move up or down the bore range and check the matching figure with us.
Can the cylinder be mounted in any orientation?
Yes. The multi-mount square body is fixed from six directions - front, back, left, right, top and bottom - and the port can be positioned to suit. Allowable side load and exact per-stroke dimensions are datasheet figures we can confirm on request.