Airtac MDJ Adjustable Cylinder MDJ20X60-50S
The AirTAC MDJ Adjustable Cylinder MDJ20X60-50S is a genuine MD multi-mount cylinder (double rod, adjustable stroke), 20 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 157.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double rod, adjustable stroke
- SeriesMD (standard)
- Bore20 mm
- Push thrust @0.5 MPa157.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ20X60-50S
The MDJ20X60-50S is an AirTAC MD-series multi-mount cylinder, a compact square-body actuator that can be fixed from 6 directions (front, back, left, right, top and bottom) and mounted side by side to save space. This adjustable-stroke, double-acting version carries a 20 mm bore with a 60 mm stroke and an additional 50 mm adjustable range, offering about 157.1 N of theoretical push thrust at 0.5 MPa for light clamping and positioning tasks. Cushioning is by bumper, and magnetic-switch slots are built around the body.
This is a genuine AirTAC part. The MD family is the standard multi-mount design, whereas the MK family adds a no-rotating plate to prevent rod rotation. As the SKU shows, this model includes a magnet. We can confirm dimensions and sizing from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ20X60-50S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ20X60-50S |
|---|---|
| Type | Multi-mount cylinder, double rod, adjustable stroke |
| Series | MD (standard) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 157.1 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Go with MD if rod rotation is acceptable, or an MK model if it must be prevented. Acting type: this MDJ is double acting with an adjustable stroke, adding a 50 mm adjustable range on top of the 60 mm stroke; the 60 mm stroke tops out the bore 20 table, and the short cover cautions against an over-long stroke, so check the envelope before ordering. The trailing S means this SKU includes a magnet; thread is PT, with G available as an option. Side-load capacity depends on the installation, so route that question to us.
Applications
Part alignment
Fix the square body from the side of a fixture and use the bumper-cushioned rod to square up parts before processing, with the adjustable range covering part variation.
Gate actuation
Mount the cylinder on the top or bottom face of a compact gate assembly and use the 60 mm stroke plus adjustable range to set gate open travel without redesigning the bracket.
Fixture indexing
Arrange cylinders side by side on a multi-station fixture, using the 20 mm bore's push thrust and the adjustable range to index parts between stations at matched heights.
FAQ
What does the '-50S' in MDJ20X60-50S mean?
MDJ marks the adjustable-stroke version of the MD double-acting multi-mount cylinder, 20 is the bore in mm, 60 is the stroke in mm, -50 is the 50 mm adjustable range added on top of the stroke, and the trailing S shows the cylinder includes a magnet. Thread is PT by default, with G available as an option.
Why should I watch the stroke length on this model?
The short cover of the multi-mount body cautions against fitting an over-long stroke, and the 60 mm stroke here is already at the top of the bore 20 table. If in doubt about your layout, side-load conditions or exact dimensions, confirm from the datasheet or ask us before ordering.