verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI16-20 Stainless Steel Mini Cylinder MI16X270SCA

The AirTAC MI16-20 Stainless Steel Mini Cylinder MI16X270SCA is a genuine double acting round-body mini air cylinder with a Ø16mm bore and 270mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ16 mm
  • Stroke270 mm
  • Port sizeM5×0.8
  • Acting typeDouble acting
  • Rod threadM6×1.0
  • CushionFixed TPU bumper pads
$38.84 $46.34Save 16% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every MI16 stroke, mounting and version on one page All MI16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X270SCA

Delivering 100.5 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles a 270 mm stroke with ease. The Ø16 mm bore uses an M5×0.8 port and an M6x1.0 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown settings. The riveted construction keeps the body compact, while fixed TPU bumper pads absorb the impact at stroke extremes.

For practical sizing, plan for about 60 N of real work at 0.5 MPa rather than the absolute maximum. The built-in piston magnet (-S) supports CMSG, DMSG and EMSG switches for position sensing. A CA rear pivot cover provides a clevis mount, and the body conforms to ISO 6432 mounting dimensions for straightforward bracket integration.

Airtac MI16-20 Stainless Steel Mini Cylinder MI16X270SCA Technical Specifications

ModelAirtac MI16-20 Stainless Steel Mini Cylinder MI16X270SCA
SeriesMI ISO 6432 mini cylinder
Bore sizeØ16 mm
Stroke270 mm
Acting typeDouble acting
Port sizeM5×0.8
Rod threadM6×1.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa101 N86 N
0.7 MPa141 N121 N
Max (@1.0 MPa)21 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI16-20 Stainless Steel Mini Cylinder MI16X270SCA

MIISO 6432 round-body mini cylinder (double-acting).
16Bore size in mm.
×270Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X270SCA Is Used

conveyor_belt

Diverter Gate Actuation

Pushes sorting flaps on packaging lines using its 100.5 N thrust, with the CA clevis allowing the pivot motion needed to angle the guide smoothly.

science

Lab Sample Ejection

Ejects processed sample trays with a 270 mm reach, where the stainless construction holds up against repeated chemical wipe-downs and humid lab conditions.

Is the Airtac MI16-20 Stainless Steel Mini Cylinder MI16X270SCA the Right Cylinder?

When sizing this 270 mm stroke model, compare it against adjacent bores: the smaller Ø12 generates 56.5 N push at 0.5 MPa, while the larger Ø20 provides 157.0 N. This Ø16 hits a useful middle ground for moderate loads. Because air pressure alone cannot maintain position if the valve is centred or supply drops, the piston will drift; add an external rod lock or pilot check valve if you need to hold a load securely mid-stroke. The 270 mm extension is well within the 500 mm standard limit, but at this length you should minimize side-loading to prevent rod bending and premature seal wear. The CA clevis back cover suits pivoting articulations, and the -S magnet allows seamless sensor placement.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI16-20 Stainless Steel Mini Cylinder MI16X270SCA FAQ

This Ø16 mm bore cylinder features an M5×0.8 port and an M6x1.0 male rod thread. At 0.5 MPa it provides 100.5 N push and 86.4 N pull. At 0.7 MPa it provides 140.7 N push and 120.9 N pull. The theoretical maximum force is 20.5 kgf at 1.0 MPa.

No, the piston will drift if air is lost or the valve is centred. The fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. To maintain vertical position, install an external rod lock or a pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI16-20 Stainless Steel Mini Cylinder MI16X270SCA

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for MI16X270SCA and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.