Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X10-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 10mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10
Dial in a precise forward stop on-site with the AirTAC MICJ16X10-10, a stainless-steel round-body mini cylinder featuring a 10mm adjustable extend stroke. An external screw trims the extend end position up to 10mm without swapping components, while a needle-set adjustable air cushion at both ends soaks up high-speed shock.
Built with a corrosion-resistant stainless barrel and rod, this double-acting unit conforms to the ISO 6432 mounting interface for standard mini brackets. It uses an M5×0.8 port and an M6x1.0 male rod thread. Note this SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors; the stop screw sets the end position but does not lock mid-stroke.
Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10 Is Used
Micro-Clamping
Securely clamps delicate electronic components with a safe 60N working load while the 10mm extend adjuster prevents over-travel damage.
Flap Deflection
Pushes carton flaps at high speed with the adjustable air cushion absorbing end-of-stroke shock, ensuring crisp 0-10mm tuned movements.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10 the Right Cylinder?
For lighter duty, AirTAC does not offer a smaller cushioned MICJ bore, though the MIJ16 bumper style exists. Choose this 16mm bore when your application needs exact set-position moves and high-speed deceleration. The adjustable stop screw and cushions are not mid-stroke locks; the piston drifts on air loss, so add an external rod lock or pilot check valve for held loads.
Mount using LB foot, FA flange, or TC trunnion brackets (SDB pivot-block is unavailable on this adjustable variant). Because this specific SKU omits the magnet, you cannot mount position sensors; select the -S variant if you require CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10 FAQ
The theoretical max force is 20.5kgf at 1.0MPa. This 16mm bore cylinder uses an M5×0.8 air port.
An external screw shortens the extend stroke by up to 10mm on-site, while needle valves tune the adjustable air cushions at both ends to decelerate high-speed impacts. The cushions only decelerate and do not lock mid-stroke; the piston drifts on air loss. This SKU has no magnet, so it cannot use sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.