Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X10-10S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 10mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10S
Trim the forward stop by up to 10 mm on site with the AirTAC MICJ16X10-10S, a double-acting stainless round-body mini cylinder that pairs an external extend adjuster with a needle-set air cushion at both ends. The built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors for exact position confirmation, while the M5×0.8 port and M6x1.0 male rod thread drop cleanly into standard ISO 6432 mini-cylinder mounting interfaces.
The stainless barrel and rod shrug off mild washdown environments, and the adjustable cushion soaks up high-speed shock without locking the piston mid-stroke.
Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10S Is Used
High-Speed Sorter Diverter
Absorb the impact of rapid 30-800 mm/s actuation with the adjustable air cushion, preventing end-of-stroke banging while the magnet confirms the divert position for a control system.
Lab Sample Ejection
Leverage the 5.1 kg vertical lift margin and stainless construction to eject washed lab samples, tuning the forward stop screw so delicate trays eject exactly to the transfer rail.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10S the Right Cylinder?
For lighter duty, the MIJ series relies on a fixed bumper instead of an air cushion and lacks this adjustable stop, making the MICJ16 the baseline choice for tunable extend positioning. The external screw sets the extend end position only and does not hold the load on air loss; pair this cylinder with a pilot-operated check valve if you need to prevent drift. Mount via LB foot, FA flange, or TC trunnion (SDB is not offered on this adjustable variant), and use the -S magnet to enable electronic or reed sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10S FAQ
An external screw shortens the extend stroke by up to 10 mm on site, while the needle-set air cushion at both ends decelerates the piston near stroke ends to absorb high-speed shock (it is not a mid-stroke lock). The -S suffix indicates a built-in piston magnet required for mounting CMSG, DMSG, or EMSG position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X10-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.