Airtac MICJ Adjustable Mini Cylinder MICJ16X100-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X100-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 100mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-10
Dial in the exact forward stop on-site with the AirTAC MICJ16X100-10, a stainless-steel round-body mini cylinder that lets an external screw shorten the extend stroke by up to 10 mm. A variable air cushion at both ends soaks up high-speed shock, letting you set the position and control the impact simultaneously. It features an M5×0.8 port, an M6x1.0 male rod thread, and conforms to the ISO 6432 mounting interface for easy bracket drops.
Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors. The stainless barrel and rod provide mild corrosion resistance for washdown environments. Note that the air cushion only decelerates the piston near the stroke end; it is not a mid-stroke lock. If you need to hold a load vertically on air loss, add an external rod lock or pilot-operated check valve.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X100-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X100-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-10 Is Used
Light Part Ejection
Eject small plastic parts at high speed, using the 10 mm extend adjuster to dial in the exact drop distance while the air cushion absorbs the end-of-stroke impact.
Small Component Pressing
Press light electronic contacts into place, tuning the forward stop screw to prevent over-travel and crushing delicate components.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-10 the Right Cylinder?
The 10 mm extend adjuster is ideal for fast set-position moves where you need to trim the forward stop without swapping cylinders. Mount via LB foot, FA flange, or TC trunnion (the SDB pivot block is not available on this adjustable variant). Remember that the stop screw sets the end position but does not lock the rod mid-stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-10 FAQ
This 16 mm bore cylinder uses an M5×0.8 port.
An external screw shortens the extend stroke by up to 10 mm on-site, while the needle-set air cushion at both ends decelerates the piston near the ends to absorb high-speed shock. This SKU has no magnet, so it cannot take a sensor; you need the -S variant for CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X100-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.