Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X100-30 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 100mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30
Trim the forward stop by up to 30 mm on site without swapping cylinders: the MICJ16X100-30 uses an external screw to shorten the extend end position from a 100 mm nominal down to 70 mm, while the retract stroke stays full. This double-acting, round-body stainless-steel mini cylinder pairs that set-position flexibility with an adjustable air cushion at both ends to soak up high-speed shock.
Built with a stainless barrel and rod for mild washdown resistance, it conforms to the ISO 6432 mounting interface for standard mini brackets. Note this SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30 Is Used
Light Part Ejection
Dial in the 70-100 mm extend stop to eject small plastic parts precisely, relying on the dual air cushions to absorb impact during high-speed cycling.
Lab Sample Handling
Leverage the stainless construction and ISO 6432 mini size for washdown-ready lab automation, adjusting the stroke on-site to route samples into different trays.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30 the Right Cylinder?
The 30 mm extend adjuster shines in fast set-position moves where you dial in the exact forward stop on the fly, and the needle-set cushion handles speeds of 30-800 mm/s. Remember the stop screw sets the end position only—it is not a mid-stroke lock; if you need to hold a load on air loss, add an external rod lock or pilot check valve. Mount via LB foot, FA flange, or TC trunnion (SDB is not offered on this adjustable variant).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30 FAQ
This Ø16 bore cylinder has an M5×0.8 port and a 6 mm rod.
An external screw shortens the extend stroke by up to 30 mm (usable range 70-100 mm), while the needle-set air cushion at both ends decelerates the piston near stroke end to reduce shock. This specific SKU has no magnet, so it cannot accept CMSG/DMSG/EMSG sensors; you would need the -S variant for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X100-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.