Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X100-40 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 100mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40
Trim the forward stop by up to 40 mm on site with the AirTAC MICJ16X100-40, a double-acting stainless round-body mini cylinder. A needle-set adjustable air cushion at both ends soaks up high-speed shock, letting you dial in the exact extend position and control the impact without swapping hardware.
The stainless barrel and rod shrug off mild washdown corrosion. Note this SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40 Is Used
Precision Feeding
Dial the 40 mm extend stop to push 5 kg blanks into a machining fixture at speed, relying on the dual air cushions to prevent end-of-stroke bounce.
Carton Flap Folding
Tuck packaging flaps on the line by setting a custom forward position, absorbing the impact of each cycle with the adjustable needle cushion.
Lab Dispense Head
Lower a dispense valve into reagents using the corrosion-resistant stainless rod, trimming the extend depth precisely without re-engineering the mount.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40 the Right Cylinder?
For lighter moves, the MIJ bumper-only series lacks this dual cushion; stepping up to the Ø20 MICJ raises the 0.5 MPa push force to 157 N. The external stop screw here is ideal for fast set-position tasks, trimming the extend end from 60 to 100 mm while retract stays full. Remember the screw and cushions only decelerate near stroke end—they will not hold a load on air loss, so fit an external pilot check valve if drift is unacceptable. Mount via LB foot, FA flange, or TC trunnion (SDB is not offered), and select the -S variant if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40 FAQ
This Ø16 bore cylinder features an M5×0.8 port and an M6x1.0 male rod thread.
An external screw shortens the extend stroke by up to 40 mm (usable range 60-100 mm), while the needle-set air cushions at both ends decelerate the piston at high speed. This specific SKU has no magnet and cannot host CMSG/DMSG/EMSG sensors; choose the -S variant for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.