Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X100-40S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 100mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40S
Dial in a precise forward stop on-site with the AirTAC MICJ16X100-40S, a stainless-steel round-body mini cylinder that lets you shorten the extend stroke by up to 40 mm via an external screw. A needle-set adjustable air cushion at both ends soaks up high-speed shock, letting you set the position and control the impact without swapping hardware.
The -S suffix equips this 16 mm bore unit with a piston magnet for CMSG, DMSG, or EMSG sensors. Conforming to the ISO 6432 mounting interface, it drops into standard mini brackets while the stainless barrel and rod resist mild washdown corrosion.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40S Is Used
Carton Flap Folding
Folds light cardboard flaps at high speed; the dual adjustable air cushions absorb the end-of-stroke shock to prevent denting the packaging.
Lab Sample Routing
Moves test tubes between stations with a safe vertical lift of about 5.1 kg, using the -S magnet and DMSG sensors to confirm extend position.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40S the Right Cylinder?
The 40 mm extend adjuster and dual air cushions shine in fast set-position moves where you must tune the forward stop and deceleration on the fly. Mount via LB foot, FA flange, or TC trunnion (the SDB pivot block is not offered on this adjustable variant). Remember the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40S FAQ
This 16 mm bore cylinder uses an M5×0.8 port and a 6 mm rod.
An external screw shortens the extend end position by up to 40 mm (usable extend 60-100 mm), while a needle valve adjusts the air cushion at both ends to decelerate high-speed moves. The -S magnet enables CMSG, DMSG, and EMSG sensors. The stop screw is not a mid-stroke lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X100-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.