Airtac MICJ Adjustable Mini Cylinder MICJ16X15-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X15-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 15mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X15-10
Trim the forward stop right on the machine with the AirTAC MICJ16X15-10, a stainless-steel round-body mini cylinder that shortens the extend stroke by up to 10 mm via an external screw. The usable extend range becomes 5 to 15 mm, letting you dial in the exact forward position without swapping hardware. It pairs this settable stop with an adjustable air cushion at both ends, soaking up high-speed shock so you control both the position and the impact.
It uses the ISO 6432 mounting interface for easy bracket drops, features an M5×0.8 port, and runs at speeds from 30 to 800 mm/s. This SKU lacks a magnet, so it cannot take CMSG, DMSG, or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X15-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X15-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X15-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X15-10 Is Used
Micro Clamping
Dial in a 5 to 15 mm clamping reach on small parts, using the adjustable stop to hit the exact grip depth without shimming.
Gate Diverting
Tune the extend stroke to actuate a short diverter gate precisely, while the air cushion absorbs the impact of fast cycling.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X15-10 the Right Cylinder?
If you need less force, there is no smaller cushioned bore in this family, so you would drop to an MIJ bumper-only cylinder. The adjustable stop and dual cushions shine in fast set-position moves where you need to trim the 5 to 15 mm extend range on the fly. Remember that the stop screw sets the end position but does not lock the piston mid-stroke; if air drops, the load drifts, so add an external rod lock or pilot check valve for holding. Use LB, FA, or TC mounts, as SDB pivot blocks are not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X15-10 FAQ
The air port is M5×0.8.
An external screw shortens the extend stroke by up to 10 mm, giving a usable 5 to 15 mm forward range, while a needle valve adjusts the air cushion at both ends to decelerate the piston. This SKU has no magnet, so you cannot mount CMSG, DMSG, or EMSG sensors; you need the -S variant for sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X15-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.