Airtac MICJ Adjustable Mini Cylinder MICJ16X150-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X150-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-10
Trim the forward stop by up to 10 mm on site without swapping cylinders using the AirTAC MICJ16X150-10. This round-body stainless steel mini cylinder pairs an external extend adjuster with a needle-set air cushion at both ends, letting you dial in the exact forward position while soaking up high-speed shock. It is a double-acting unit, so retract remains at the full 150 mm stroke.
Built with a stainless barrel and rod for mild washdown resistance, it conforms to the ISO 6432 mounting interface for Ø16 bores. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors without the -S variant. The M5×0.8 port and M6x1.0 male rod thread match standard mini fittings.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X150-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X150-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-10 Is Used
Package Diverting
Divert lightweight cartons on a line, relying on the adjustable air cushion to absorb shock during high-speed 150 mm strokes.
Sensor Tag Placement
Press adhesive labels onto small components, dialing in the exact forward position to ensure consistent placement depth.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-10 the Right Cylinder?
The 10 mm extend trim and dual adjustable cushions shine in fast set-position moves where you must tune the forward impact without re-engineering the assembly. Mount it using LB foot brackets, FA flanges, or TC trunnions, as the SDB pivot block is not offered on adjustable-stroke builds. Remember that the stop screw sets the end position but does not lock the piston mid-stroke; if you need to hold a load on air loss, install an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-10 FAQ
It uses an M5×0.8 air port.
An external screw shortens the extend stroke by up to 10 mm, while the needle-set air cushion at both ends decelerates the piston near stroke ends to absorb high-speed shock. The cushion only decelerates and does not act as a mid-stroke lock; the piston will drift on air loss. This SKU has no magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X150-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.