Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X150-100 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100
Trim the forward stop on site without swapping cylinders: the AirTAC MICJ16X150-100 uses an external screw to shorten the extend stroke by up to 100 mm, yielding a usable 50-150 mm forward position. Because it is a double-acting round-body stainless steel mini cylinder, the built-in adjustable air cushion at both ends soaks up high-speed shock so you set the position and control the impact simultaneously.
It conforms to the ISO 6432 mounting interface for easy bracket drops, runs at 30-800 mm/s, and uses an M5×0.8 port with an M6x1.0 male rod thread. This SKU lacks the -S magnet, so it cannot accept CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100 Is Used
Precision Feeder Stop
Dial in the 50-150 mm extend stop to halt light 5 kg material strips precisely, while the dual air cushions absorb the impact of 800 mm/s travel.
Lab Sample Ejector
Rely on the stainless steel construction and washdown resistance to push test samples out of a wet station, tuning the extend end without changing hardware.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100 the Right Cylinder?
If you need less force, there is no smaller cushioned MICJ bore—you would drop to the MIJ bumper type. This Ø16 model excels in fast set-position moves where the 100 mm extend adjuster and dual needle cushions dial in the exact stop and deceleration.
The stop screw sets the end position but is not a mid-stroke lock; the piston drifts on air loss, so add an external rod lock or pilot check valve to hold a suspended load. Mount via LB foot, FA flange, or TC trunnion (SDB pivot-block is not offered on this adjustable variant), and choose the -S version if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100 FAQ
This double-acting cylinder pushes 100.5 N and pulls 86.4 N at 0.5 MPa, pushes 140.7 N and pulls 120.9 N at 0.7 MPa, and reaches a theoretical max of 20.5 kgf at 1.0 MPa. It uses an M5×0.8 air port and a 6 mm piston rod with an M6x1.0 male thread.
An external screw shortens the extend stroke by up to 100 mm on site (retract remains full), while adjustable air cushions at both ends decelerate the piston near the ends to absorb high-speed shock. The cushion only decelerates and the screw only sets the end position—neither acts as a mid-stroke lock, so the piston drifts on air loss; use an external rod lock for holding. This non-S SKU cannot take sensors, but the -S variant adds a magnet for CMSG/DMSG/EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.