Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X150-100S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100S
Dial in a precise forward stop on-site with the AirTAC MICJ16X150-100S, a stainless-steel round-body mini cylinder that shortens the extend stroke by up to 100 mm via an external screw. The usable extend range becomes 50 to 150 mm, while retract remains full. Because it is a double-acting actuator with an adjustable air cushion at both ends, it soaks up high-speed shock at the stroke limits, letting you set the position and control the impact simultaneously.
The riveted stainless barrel and Ø6 mm rod resist mild corrosion and washdown. Since this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG position switches.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100S Is Used
Film Feed Tensioning
Pays out packaging film at up to 800 mm/s while the adjustable air cushion absorbs the end-of-stroke shock, preventing web tears on sudden stops.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100S the Right Cylinder?
When sizing this 16 mm bore, stepping down means moving to an MIJ bumper-only variant, as MICJ cushioning starts at this size. If your application needs more force, the next size up is the Ø20 bore, which raises the 0.5 MPa push force from 100.5 N to 157 N. The adjustable stop screw and dual cushion shine in fast set-position moves where you must trim the forward end without swapping hardware. Remember the stop screw sets the end position but is not a mid-stroke lock; the cylinder will drift on air loss. Use an external pilot check valve if you need to hold a load. Mount via LB, FA, or TC brackets (SDB is not offered), and use the built-in magnet for CMSG/DMSG/EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100S FAQ
This 16 mm bore cylinder uses an M5×0.8 port and a Ø6 mm rod. At 0.5 MPa it pushes 100.5 N and pulls 86.4 N. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend end by up to 100 mm, giving a usable forward range of 50-150 mm, while the needle-set air cushion at both ends decelerates the piston at high speed. The cushion only decelerates and is not a brake; the cylinder drifts on air loss. The -S magnet enables CMSG, DMSG, and EMSG sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X150-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.