Airtac MICJ Adjustable Mini Cylinder MICJ16X150-20S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X150-20S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-20S
Trim the forward stop by up to 20 mm on site without swapping cylinders, and let the adjustable air cushion at both ends soak up high-speed shock. The AirTAC MICJ16X150-20S is a double-acting, ISO 6432 round-body stainless-steel mini cylinder with a built-in magnet. Its M5×0.8 port and M6x1.0 male rod thread drop into standard mini brackets, while the stainless barrel and rod resist mild washdown corrosion.
The external screw sets the extend end position only, giving a usable forward range of 130-150 mm alongside the full retract stroke.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-20S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X150-20S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X150-20S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-20S Is Used
Package Diverting
Sorts lightweight cartons on a line at speeds up to 800 mm/s, relying on the adjustable air cushion to prevent end-of-stroke impact.
Lab Sample Handling
Moves delicate test tubes into position with a 5.1 kg vertical lift margin, using the stainless construction for mild washdown resistance.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-20S the Right Cylinder?
If you need less force, the smaller MIJ series relies on a bumper instead of an air cushion, making this MICJ model the smallest bore with true adjustable shock absorption.
The adjustable stop and cushion excel in fast set-position moves, but remember the piston drifts on air loss since the cylinder does not hold position. For suspended loads, add an external rod lock or pilot check valve. Mount via LB foot, FA flange, or TC trunnion since the SDB pivot block is unavailable here. The -S magnet enables CMSG, DMSG, and EMSG sensors for position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-20S FAQ
An external screw shortens the extend stroke by up to 20 mm, while the needle-set air cushion at both ends decelerates the piston near the ends. The -S denotes a built-in magnet for CMSG, DMSG, or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X150-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.