Airtac MICJ Adjustable Mini Cylinder MICJ16X150-50
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X150-50 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-50
Trim the forward stop on site without swapping hardware using the AirTAC MICJ16X150-50. This double-acting round-body stainless steel mini cylinder features an external screw that shortens the extend stroke by up to 50 mm, giving a usable forward range of 100-150 mm. Tunable air cushions at both ends soak up high-speed shock so you can set the exact position and control the impact simultaneously.
Built with a stainless barrel and piston rod for mild washdown resistance, it conforms to the ISO 6432 mounting interface for straightforward bracket drops. It uses an M5×0.8 port and an M6x1.0 male rod thread. Note this SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-50 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X150-50 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X150-50
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-50 Is Used
Light Diverter
Deflect small cartons on a packaging line, using the adjustable air cushion to softly stop the 150 mm stroke at high cycle speeds without slamming.
Part Ejector
Push lightweight molded parts out of a machining area, tuning the external stop screw to match varying product lengths on the fly.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-50 the Right Cylinder?
When sizing this 16 mm bore, dropping to a smaller standard cushioned cylinder is not an option, but the MIJ bumper-style series covers lighter duties. The adjustable stop screw and dual air cushions shine in fast set-position moves where you need repeatable end-of-stroke deceleration without mechanical slamming.
This cylinder does not hold position on air loss, as the piston drifts without pressure, and the cushion only decelerates near the end of travel rather than acting as a mid-stroke lock. For suspended loads, pair it with an external rod lock or pilot check valve. Mounting options include LB foot, FA flange, and TC trunnion, plus CA, U, R, or CM back covers, but the SDB pivot block is not available on this adjustable variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-50 FAQ
It uses an M5×0.8 air port and an M6x1.0 male rod thread.
An external screw shortens the extend stroke by up to 50 mm on site, while needle-adjustable air cushions at both ends absorb high-speed shock. This specific SKU has no magnet, so it cannot accept CMSG, DMSG, or EMSG sensors; you would need the -S variant for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X150-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.