Airtac MICJ Adjustable Mini Cylinder MICJ16X150-75S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X150-75S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-75S
Dial in the forward stop on site without swapping hardware: the AirTAC MICJ16X150-75S uses an external screw to shorten the extend stroke by up to 75 mm, giving a usable forward range of 75-150 mm. As a double-acting, round-body stainless-steel mini cylinder, it pairs that settable end-position with an adjustable air cushion at both ends to soak up high-speed shock.
The stainless barrel and rod resist mild corrosion and washdown. Because this SKU carries the -S suffix, a built-in piston magnet is ready for CMSG, DMSG or EMSG position switches. The M5×0.8 port and M6x1.0 male rod thread keep pneumatic and mechanical integration simple.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-75S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X150-75S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X150-75S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-75S Is Used
Variable Transfer Pusher
Set the forward stop on the fly to push different box sizes between transfer belts, letting the adjustable air cushion absorb the impact at high speed.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X150-75S the Right Cylinder?
The adjustable stop and dual cushions shine in fast set-position moves where you must repeatedly hit a precise forward spot without crashing. Choose LB foot, FA flange or TC trunnion mounts, as the SDB pivot-block is not offered on this adjustable variant. Remember that the stop screw sets the end position but does not lock mid-stroke; the cylinder will drift on air loss, so fit an external rod lock or pilot check valve to hold a suspended load. Match your sensing needs by relying on the included -S magnet for CMSG, DMSG or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X150-75S FAQ
It uses an M5×0.8 air port and a 6 mm piston rod with an M6x1.0 male thread.
An external screw shortens the extend stroke by up to 75 mm (retract stays full), while the adjustable air cushion at both ends decelerates the piston near stroke ends to absorb high-speed shock. The -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X150-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.