Airtac MICJ Adjustable Mini Cylinder MICJ16X160-75S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X160-75S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 160mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X160-75S
Dial in a precise forward stop on-site with the AirTAC MICJ16X160-75S, a stainless-steel round-body mini cylinder that shortens its extend stroke by up to 75 mm via an external screw. Usable extend ranges 85-160 mm, while the retract remains full. A needle-set adjustable air cushion at both ends soaks up high-speed shock to protect your tooling.
Built to the ISO 6432 mounting interface, this double-acting Ø16 bore drops into standard mini brackets and features a built-in magnet (-S) for CMSG/DMSG/EMSG sensors. The M5×0.8 port and M6x1.0 male rod thread provide straightforward integration for light-force positioning tasks.
Airtac MICJ Adjustable Mini Cylinder MICJ16X160-75S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X160-75S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X160-75S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X160-75S Is Used
Package Diverting
Handles light cartons on a line at speed, relying on the dual adjustable air cushions to decelerate the 160 mm stroke smoothly and prevent end-impact slamming.
Lab Sample Routing
Moves test tubes between stations where the stainless build resists mild washdown, and the -S magnet triggers CMSG sensors to confirm the extend position.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X160-75S the Right Cylinder?
For lighter duty, the MIJ bumper-only series lacks the air cushion needed for high-speed moves; stepping up to a Ø20 MICJ raises the 0.5 MPa push force to 157 N.
The external stop screw sets the extend end position but does not lock the piston mid-stroke; if air drops, the load drifts, so add an external rod lock or pilot check valve for holding. Mount via LB foot, FA flange, or TC trunnion (SDB is not offered), and use the -S magnet for CMSG/DMSG/EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X160-75S FAQ
This double-acting cylinder pushes 100.5 N and pulls 86.4 N at 0.5 MPa, and pushes 140.7 N / pulls 120.9 N at 0.7 MPa. The theoretical max force is 20.5 kgf at 1.0 MPa. It uses an M5×0.8 air port.
An external screw shortens the extend stroke by up to 75 mm (usable 85-160 mm), while a needle valve adjusts the air cushion at both ends to absorb high-speed shock. The cylinder does not hold position on air loss; use an external rod lock for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X160-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.