Airtac MICJ Adjustable Mini Cylinder MICJ16X175-10
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X175-10 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-10
Dial in the forward stop on-site without swapping cylinders: this AirTAC MICJ16X175-10 miniature actuator uses an external screw to shorten the extend end position by up to 10 mm, giving a usable forward range of 165-175 mm. It pairs that settable stop with a needle-adjustable air cushion at both ends to soak up high-speed shock. The stainless-steel round barrel and Ø6 mm piston rod resist mild corrosion and washdown environments.
It is double-acting, runs at 30-800 mm/s, and uses an M5×0.8 port. Note this specific SKU lacks a magnet, so it cannot host CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X175-10 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X175-10 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X175-10
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-10 Is Used
Micro-Clamp Positioning
Tunes the final 10 mm of extend to seat a delicate 5 kg micro-clamp precisely without shocking the part, using the dual-end air cushion.
Light Pouch Sealing
Adjusts the forward stop to perfectly press a sealing jaw against varying pouch thicknesses while absorbing the 100.5 N impact at high cycle rates.
Lab Dispense Head
Sets an exact 168 mm dispense depth in a washdown-resistant stainless setup, letting the needle cushion absorb the end-of-stroke force.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-10 the Right Cylinder?
This 16 mm bore is ideal when you need precise end-position tuning alongside shock absorption for fast, repetitive moves.
Remember that the stop screw sets the end position but does not lock the piston mid-stroke, and the air cushion only decelerates near the ends. If air pressure drops, the rod drifts; use an external rod lock or pilot check valve to hold a suspended load. For mounting, use LB, FA, or TC attachments (SDB is not offered on adjustable-stroke types). Because this exact SKU has no -S magnet, position sensing is not possible here.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X175-10 FAQ
The theoretical max force is 20.5 kgf at 1.0 MPa. This 16 mm bore cylinder features an M5×0.8 port and a Ø6 mm rod.
An external screw shortens the extend stroke by up to 10 mm (retract remains full), while the needle-adjustable air cushion decelerates the piston at both ends. This SKU has no magnet, so it cannot take CMSG/DMSG/EMSG sensors; you would need the -S variant for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X175-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.