Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X175-50 is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50
Trim the forward stop on site without swapping hardware: the MICJ16X175-50 uses an external screw to shorten the extend stroke by up to 50 mm, giving a usable forward range of 125-175 mm. Retract remains full length. This double-acting, stainless-steel round-body mini cylinder also features a needle-adjustable air cushion at both ends to soak up high-speed shock right before the end of travel.
Built to the ISO 6432 mounting interface, the Ø16 bore drops into standard mini brackets and clevises. It pushes with 100.5 N at 0.5 MPa (140.7 N at 0.7 MPa) and pulls 86.4 N at 0.5 MPa. The M5×0.8 port and M6x1.0 male rod thread keep the footprint compact, while the stainless barrel and rod resist mild washdown corrosion. Because this SKU lacks the -S magnet, it cannot host CMSG/DMSG/EMSG sensors.
Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50 Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50 |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50 Is Used
Light-Part Ejection
Dial the extend stop in 50 mm to eject light plastic parts precisely, letting the adjustable air cushion absorb the impact of fast 30-800 mm/s moves.
Lab Dispense Positioning
Use the stainless round body in mildly humid lab environments, fine-tuning the extend end position to meter liquids accurately within the 125-175 mm window.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50 the Right Cylinder?
Size this Ø16 bore against its neighbors: if your move needs less force, the smaller MIJ series offers only a non-adjustable bumper (no air cushion), so you lose shock control. If you need more push, stepping up to the Ø20 bore raises the 0.5 MPa push force to 157 N. The MICJ16X175-50 is ideal when you need to dial in a precise extend position on a fast cycle, letting the dual cushions absorb the impact. For holding a load on air loss, note that the stop screw and cushions only decelerate; they do not lock the piston mid-stroke, so add an external rod lock or pilot check valve for suspended loads.
Mount using LB foot, FA flange, or TC trunnion brackets, or CA/U/R/CM back covers (the SDB pivot block is not offered on this adjustable-stroke build). If you require position sensing, select the -S magnet variant to enable CMSG/DMSG/EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50 FAQ
This double-acting cylinder pushes with 100.5 N and pulls with 86.4 N at 0.5 MPa. At 0.7 MPa, push is 140.7 N and pull is 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa. It uses an M5×0.8 air port and an M6x1.0 male rod thread.
An external screw shortens the extend stroke by up to 50 mm (retract stays full), while a needle valve adjusts the air cushion at both ends to decelerate the piston before impact. The stop screw sets the end position but is not a mid-stroke lock; the cylinder drifts on air loss, so use a pilot check valve for holding. This SKU has no magnet (-S) and cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.