Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50S
The AirTAC MICJ Adjustable Mini Cylinder MICJ16X175-50S is a genuine double acting, double rod, adjustable stroke + cushion round-body mini air cylinder with a Ø16mm bore and 175mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
- BoreØ16 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50S
Dial in a precise forward stop on-site with the AirTAC MICJ16X175-50S, a stainless-steel round-body mini cylinder featuring a 50 mm extend-stroke adjuster. The external screw trims the forward end position down to a 125 mm usable extend, while the retract stroke remains full. A needle-set adjustable air cushion at both ends soaks up high-speed shock, letting you set the position and control the impact simultaneously.
The built-in magnet (-S) supports CMSG, DMSG, and EMSG sensors for position feedback. The M5×0.8 port and M6x1.0 male rod thread ensure standard mini-cylinder mounting interchangeability.
Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50S Technical Specifications
| Model | Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50S |
|---|---|
| Series | MICJ ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
MIJ / MICJ are double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50S
| MICJ | ISO 6432 round-body mini cylinder (adjustable-stroke, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50S Is Used
Light-Part Ejection
Tune the 125-175 mm extend stop to eject 4 kg plastic parts from a mold at speed, using the dual air cushions to prevent endcap impact damage.
Package Diverter
Divert small cartons on a line by dialing in the exact stroke length needed to clear the belt, absorbing the shock of high-speed routing shifts.
Is the Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50S the Right Cylinder?
For lighter duty, the MIJ series relies on a fixed bumper and lacks this needle cushion, making the MICJ16 your entry point for tuned shock absorption. The 50 mm extend adjuster is perfect for fast set-position moves where you need to tune the forward stop without swapping hardware. Remember that the stop screw sets the end position but is not a mid-stroke lock; the piston will drift on air loss, so add an external rod lock or pilot check valve for held loads. Use LB, FA, or TC mounts (SDB is unavailable here), and pair the -S magnet with electronic or reed switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50S FAQ
The theoretical maximum force is 20.5 kgf at 1.0 MPa.
An external screw shortens the extend stroke by up to 50 mm (usable extend 125-175 mm), while the retract remains full. Needle-set adjustable air cushions at both ends decelerate the piston near stroke end to absorb shock. The -S suffix means a built-in piston magnet is present for CMSG, DMSG, or EMSG position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC MICJ Cylinders
Request a Quote for Airtac MICJ Adjustable Mini Cylinder MICJ16X175-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.